Pozi Countersunk Woodscrew

A combination of 4CUT point, MULTIhead and patented ground serrations that makes a Spax screw one of the best woods screw on the market. The 4CUT point bores into wood and divides the fibres while the deep thread with ground serrations drive the screw on. This prevents the material from splitting. The patented MULTIhead has countersinking and stopping qualities at the same time. The ribs cut into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily. The ribs also help prevent thread stripping when fixing hinges etc. Spax screws give trouble free fastening in all varieties of materials: hard or soft wood, plastics or thin sheet metal.

Yellow Zinc Plated

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 915.

Metric sizes - Dog Point - Self Colour

For permanent location of one part to another. The point is generally centre spotted and a location hole drilled in the shaft or ground flat where location is made.

Rawl Rawlbolt Eye Bolts

Suitable for temporary and permanent anchorage. Supplied complete with shield, washer and hex nut. Must not be used for safety harness applications or for lifting where shock load could be applied. Typical applications include supporting guy ropes, stays, cables and supporting ladder restraints.

For all dimensional specifications please refer to our catalogue.

Eye Bolts

N.B. Priced Individually - Standard Box Quantity = 25 Pieces

Washers

Single coil square section spring washers. DIN 7980. Self colour.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Metric Helicoil Hand Taps

Used to tap through and blind holes to produce threads all the way to the bottom.

Bottoming Taps

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 916.

Metric sizes - Plain Cup Point - Self Colour

For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.

UNC HeliCoil Inserts - Free Running

Thread Repair System. Provides effective means of reinforcing and repairing tapped threads. Widely used in automotive and aerospace industries with approvals from British Aerospace, CAA, Fairey, Lucas, MOD, Westland and other recognised organisations.

x3D

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN914.

Metric sizes - Cone Point - Self Colour

For permanent location of parts. Deep penetration for maximum radial and axial fixing power. Can be used as pivots and where fine adjustment is required.

High Tensile Hexagon Head Set Screws

High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.

Metric Sizes - Self Colour

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - Bright Zinc Plated