Rawl Wedge Anchors

Zinc plated standard type. Provide permanently fixed threaded sockets in concrete. Allows both bolts and threaded rods to be installed and removed without damaging the anchor.

Wedge Anchors (Pk of 50)

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metirc Sizes - Bright Zinc Plated

Pozi Countersunk Woodscrew

A combination of 4CUT point, MULTIhead and patented ground serrations that makes a Spax screw one of the best woods screw on the market. The 4CUT point bores into wood and divides the fibres while the deep thread with ground serrations drive the screw on. This prevents the material from splitting. The patented MULTIhead has countersinking and stopping qualities at the same time. The ribs cut into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily. The ribs also help prevent thread stripping when fixing hinges etc. Spax screws give trouble free fastening in all varieties of materials: hard or soft wood, plastics or thin sheet metal.

Yellow Zinc Plated

Washers

Single coil square section spring washers. DIN 7980. Self colour.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (Metric)

Available in packs of 10 and 50.

High Tensile Hexagon Head Set Screws

BSF Thread. BS1083. Grade R. Self colour.

Washers

Bright Zinc plated Repair/Mudguard/Penny washers. Mild steel.

Inch

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 913.

Metric sizes - Flat Point - Self Colour

For use where parts are frequently reset. This style of point causes the least amount of damage to the component it locks on to. Can be used against hardened shafts, preferably with a ground flat for improved surface contact. Ideal for use as an adjusting screw and in thin wall thicknesses and on soft plugs.

Spring Tension Pins

Carbon steel. Self colour.

Inch

Socket Head Shoulder Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for replacing costly components such as shafts, pivots, guides, pins, linkages and trunion mountings. Also commonly used in the die mould industry. Maximum operating temperature (unplated): 300C. Dimensions to Body Diameter Tol h8.

Inch (BSW) - Standard Self Colour