Silver-TT? Twin Thread Woodscrews

Ideal for power driving into hard wood, soft wood, MDF and chip-board. High helix double thread, ?drives home? in half the time of standard screws. Precision manufactured, thinner shank reduces wood splitting. Fully heat-treated and extremely hard for high resistance to breakage in high torque applications. Plated to five microns for greater corrosion-resistance. 35 point angle usually needs no pilot hole.

High Tensile Hexagon Head Set Screws

High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.

Metric Sizes - Self Colour

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Metric

Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.

Qualfast High Quality Screwed Studding

Colour-coded at each end of length for easy identification as shown.

Yellow = Metric
Green = BSF
Blue = UNF
Red = BSW
White = UNC
Orange = Grade 8.8
Black =
Stainless Steel

Mild Steel - Grade 4.6 Self-Colour - UNF

Matlock Wood Screws

For power driving into hard and soft wood, MDF and chipboard. Manufactured to reduce wood split. Heat-treated for high resistance to breakage. With an aggressive clean cutting single thread drives easily - even in MDF and chipboard. Passivated zinc plated and lubricated to aid penetration. 25 point angle usually needs no pilot.

Gold-ZP Fibre Board Woodscrews

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

UNC Helicoil Hand Taps

Used to tap through and blind holes to produce threads all the way to the bottom.

Bottoming Taps

Zinc Protected Hose Clips

All mild steel zinc protected hose clip, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991.

Zinc Protected Hose Clips

All mild steel zinc protected hose clip, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991.

Qualfast Aluminium Rivets

For all applications of blind riveting. Aluminium rivet head with steel mandrel. Medium strength, use with aluminium and where rust is a problem. Select grip based on thickness of material to be riveted.

Dome head.