产品 / 紧固件/工具
编号：CTL6550642C
●产品描述：
Spring Tension Pins
Carbon steel. Self colour.
Metric
编号：CTL6452346G
●产品描述：
Washers
Bright mild steel flat washers. Inch. Table 3 Heavy. BS4310. Plain edge.
Inch
N.B. Priced Individually - Standard Box Quantity = 100 Pieces
编号：QFT6044200A
●产品描述：
Socket Head Button Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. Dimensions to BS EN ISO 7380.
Metric Sizes - Bright Zinc Plated
编号：MTL6340530K
●产品描述：
Matlock Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
编号：QFT6051760L
●产品描述：
Socket Head Countersunk Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.
Inch (BSF) - Standard Self Colour
编号：HEL6225614P
●产品描述：
UNF HeliCoil Inserting Tools
Tool Style 4. For all technical specifications please refer to our catalogue.
编号：QFT6023233R
●产品描述：
Socket Set Screws
High tensile alloy steel. Grade 14.9. DIN 916.
Metric sizes - Plain Cup Point - Self Colour
For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.
编号：CTL6316441D
●产品描述：
High Tensile Hexagon Head Set Screws
UNC Thread. BS1768. Grade S. Self Colour.
编号：CTL6404803D
●产品描述：
Nyloc Nuts
Zinc plated. Shakeproof. Available in Type P Metric (conforms to DIN 982) and Type T Metric (conforms to DIN 985).
Metric Type T
编号：QFT6023114S
●产品描述：
Socket Set Screws
High tensile alloy steel. Grade 14.9. DIN 916.
Metric Sizes - Knurled Cup Point - Self Colour
For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above M6 are generally counterbored to provide maximum clamping efficiency.