High Tensile Hexagon Head Bolts

DIN 931. Grade 8.8.

Metric Sizes - Self Colour

Self Tapping Screws

Self-tapping steel screws. AB zinc-plated. For use on sheet metal and other malleable materials. DIN: 7982 C Z.

PoziDriv - Countersunk (Inch)

Qualfast Internal Circlips

Circlips simplify designs and linked with lower installation costs are the ideal item for replacing more traditional fasteners. All are manufactured from carbon steel with a phosphate finish. External DIN 472.

Spring Tension Pins

Carbon steel. Self colour.

Metric

Kennedy Thread Repair

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Thread Insert Kits (Metric)

Each Kennedy Professional Thread Repair Wire Insert Kit is supplied complete with a Hand Tap, Inserting Tool and Inserts.

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Inch

Sizes 1/8" are manufactured from hardened silver steel, 3/16" and above are high quality case hardened mild steel.

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 916.

Metric sizes - Plain Cup Point - Self Colour

For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.

Pozi Countersunk Woodscrew

A combination of 4CUT point, MULTIhead and patented ground serrations that makes a Spax screw one of the best woods screw on the market. The 4CUT point bores into wood and divides the fibres while the deep thread with ground serrations drive the screw on. This prevents the material from splitting. The patented MULTIhead has countersinking and stopping qualities at the same time. The ribs cut into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily. The ribs also help prevent thread stripping when fixing hinges etc. Spax screws give trouble free fastening in all varieties of materials: hard or soft wood, plastics or thin sheet metal.

Yellow Zinc Plated

UNF Helicoil Hand Taps

Used to tap through and blind holes to produce threads all the way to the bottom.

Bottoming Taps

Socket Set Screws

High tensile alloy steel. Grade 14.9. BS 2470. For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above 1/4? are generally counterbored to provide maximum clamping efficiency.

Inch (BSW) - Knurled Cup Point - Self Colour