Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (Metric)

Available in packs of 10 and 50.

Hexagon Full Nuts

Self colour. Conform to DIN 934.

Metric

Matlock Wood Screws

For power driving into hard and soft wood, MDF and chipboard. Manufactured to reduce wood split. Heat-treated for high resistance to breakage. With an aggressive clean cutting single thread drives easily - even in MDF and chipboard. Passivated zinc plated and lubricated to aid penetration. 25 point angle usually needs no pilot.

Gold-ZP Fibre Board Woodscrews

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. Dimensions to BS EN ISO 7380.

Metric Sizes - Standard Self Colour

A2 Stainless Steel - Countersunk

Pin Hex security screws with internal pin within the socket - prevents the use of standard hex keys. Suitable for medium torque applications.

Brass Nuts

Hex Full Nuts.

Metric

A2 Stainless Steel Countersunk Slotted Machine Screws

Manufactured from Stainless steel to prevent rusting or where high temperatures are a consideration.

Hexagon Full Nuts

Zinc plated. Conform to DIN934.

Metric

Rawl Nail Fuel Packs

Pasload IM350 compatible. Strips of collated silver galvanised nails for use with the Rawl WW90CH framing nail gun. Packs include high quality gas cylinders proven to prevent residue build up and misfires which plague cheaper imported nails. Also compatible with: ITW Paslode IM350 Makita GN900SE Hitachi NR90GC/NR90GC2 plus other Senco, Powers, Max & BeA tools. The gas cylinders have no expiry date as they do not expire.

Rawlplug Nails Galvanised (Ring Shank) R-DRG-3175

Size: 3.1 x 75mm.
Pack size: 2200.

Matlock Galvanised ELH Clout (Felt) Nails

Extra Large Head (ELH) clout nails , galvanised coated mostly used for felt materials i.e. shed roofs etc.