Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

Zinc Plated Nut and Bolt Clips

Mild zinc protected nut and bolt clips. Ideal for use on petrol pipes and small bore hoses. 7mm A/F screw, 1.2Nm maximum tightening torque.

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. Dimensions to BS EN ISO 7380.

Metric Sizes - Standard Self Colour

High Tensile Hexagon Head Set Screws

BSF Thread. BS1083. Grade R. Self colour.

Heavy Duty Stainless Steel Bolt Clamps

Heavy duty bolt clamps to DIN 3017 are specifically designed to give extremely high band tension for sealing pressure/suction lines with either steel or plastic reinforcement and high shore hardness. Reinforced loops withstand significantly higher torques and the mechanically locked closure has no welding points and therefore no contact corrosion. Bridge gives optimal hose protection and the robust band with rounded edges for protection against injuries and/or damage to the hose surface. The band, housing and screw are all made from high grade 316 Stainless steel.

Spring Tension Pins

Carbon steel. Self colour.

Inch

A2 Stainless Steel - Button Head

A2 Stainless Steel - Button Head

Kennedy Thread Repair

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Thread Insert Kits (Metric)

Each Kennedy Professional Thread Repair Wire Insert Kit is supplied complete with a Hand Tap, Inserting Tool and Inserts.

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. UNC/UNF Dimensions to ANSI B 18.3. BSW/BA Dimensions to BS 2470.

Inch (UNC) - Standard Self Colour

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to DIN 7991.

Metric Sizes - Standard Self Colour