Socket Head Shoulder Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for replacing costly components such as shafts, pivots, guides, pins, linkages and trunion mountings. Also commonly used in the die mould industry. Maximum operating temperature (unplated): 300C. Dimensions to Body Diameter Tol h8.

Inch (BSW) - Standard Self Colour

Pozi Countersunk Woodscrew

A combination of 4CUT point, MULTIhead and patented ground serrations that makes a Spax screw one of the best woods screw on the market. The 4CUT point bores into wood and divides the fibres while the deep thread with ground serrations drive the screw on. This prevents the material from splitting. The patented MULTIhead has countersinking and stopping qualities at the same time. The ribs cut into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily. The ribs also help prevent thread stripping when fixing hinges etc. Spax screws give trouble free fastening in all varieties of materials: hard or soft wood, plastics or thin sheet metal.

Yellow Zinc Plated

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BSF) - Self Colour

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Metric

Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Inch

Sizes 1/8" are manufactured from hardened silver steel, 3/16" and above are high quality case hardened mild steel.

Qualfast High Quality Screwed Studding

Colour-coded at each end of length for easy identification as shown.

Yellow = Metric
Green = BSF
Blue = UNF
Red = BSW
White = UNC
Orange = Grade 8.8
Black =
Stainless Steel

Mild Steel - Grade 4.6 Self-Colour - Metric

A2 Stainless Steel - Countersunk

A2 Stainless Steel - Countersunk

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BSW) - Self Colour

A2 Stainless Steel Dome Nuts

Metric. Dome nuts are used for all types of applications, especially where appearance is essential.

A2 Stainless Steel Full Nuts

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration.
Conform to DIN 934.

Metric