Socket Head Cap Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN916.

Metric sizes - Plain Cup Point - Self Colour

DIN916. For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.

Silver-TT? Twin Thread Woodscrews

Ideal for power driving into hard wood, soft wood, MDF and chip-board. High helix double thread, ?drives home? in half the time of standard screws. Precision manufactured, thinner shank reduces wood splitting. Fully heat-treated and extremely hard for high resistance to breakage in high torque applications. Plated to five microns for greater corrosion-resistance. 35 point angle usually needs no pilot hole.

High Tensile Hexagon Head Set Screws

High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.

Metric Sizes - A2 Stainless Steel

Socket Head Countersunk Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. Dimensions to BS EN ISO 7380.

Metric Sizes - Bright Zinc Plated

Zinc-Plated Hose Clip Sets

Non-slip worm drive. Precision manufactured from the finest British steels to BS 5315. Passivated zinc finish gives double protection. For automotive, gas, plumbing and agricultural applications. Both sets contain size 000 to size 8.
(9 to 178mm diameter).

High Tensile Hexagon Head Bolts

BSF Thread. BS1083. Grade R. Self colour.

Inch (BSF) - Self Colour

Kennedy Extractable Dowels

Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.

Socket Set Screws

High tensile alloy steel. Grade 14.9. BS 2470. For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above 1/4? are generally counterbored to provide maximum clamping efficiency.

Inch (BSW) - Knurled Cup Point - Self Colour