Nyloc Nuts

Zinc plated. Shakeproof. Available in Type P Metric (conforms to DIN 982) and Type T Metric (conforms to DIN 985).

Metric Type T

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.

Inch (BSW) - Standard Self Colour

Pan Head Machine Screws - BZP

Pozi pan head head machine screws. Bright zinc-plated. To DIN7985.

Socket Set Screws

High tensile alloy steel. Grade 14.9. BS 2470. For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above 1/4? are generally counterbored to provide maximum clamping efficiency.

Inch (UNC) - Knurled Cup Point - Self Colour

Socket Head Button Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 915.

Metric sizes - Dog Point - Self Colour

For permanent location of one part to another. The point is generally centre spotted and a location hole drilled in the shaft or ground flat where location is made.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

Qualfast High Quality Screwed Studding

Colour-coded at each end of length for easy identification as shown.

Yellow = Metric
Green = BSF
Blue = UNF
Red = BSW
White = UNC
Orange = Grade 8.8
Black =
Stainless Steel

High Tensile Steel - Grade 8.8 BZP

Socket Head Shoulder Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for replacing costly components such as shafts, pivots, guides, pins, linkages and trunion mountings. Also commonly used in the die mould industry. Maximum operating temperature (unplated): 300C. Dimensions to Body Diameter Tol h8.

Inch (BSW) - Standard Self Colour

Qualfast Stainless Steel Fastener Assortment Kits

Contents: 3.5 x 16, 3.5 x 20, 3.5 x 25, 4.0 x 20, 4.0 x 25, 4.0 x 30, 5.0 x 25, 5.0 x 30, 5.0 x 40 and 5.0 x 50. Average quantity: 625.

Metric - A2 Stainless Steel Pozi CSK Woodscrew Kit