Socket Head Button Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 915.

Metric sizes - Dog Point - Self Colour

For permanent location of one part to another. The point is generally centre spotted and a location hole drilled in the shaft or ground flat where location is made.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

A2 Stainless Steel - Countersunk

A2 Stainless Steel - Countersunk

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.

Inch (UNF) - Standard Self Colour

Hammer-In Fixings (Assembled)

For fast, repetitive fixing with minimal use of
screwdriver required. Reinforced screwhead facilitates
high knock-in loads with the added benefit of plug neck grip. Hammer in drive screw for fast installation. Extended expansion zone gives extra grip. Suitable for use in concrete, stone, brickwork and blockwork.

UNF HeliCoil Inserts - Free Running

Thread Repair System. Provides effective means of reinforcing and repairing tapped threads. Widely used in automotive and aerospace industries with approvals from British Aerospace, CAA, Fairey, Lucas, MOD, Westland and other recognised organisations.

x2D

Metric HeliCoil Inserts - Free Running

Thread Repair System. Provides effective means of reinforcing and repairing tapped threads. Widely used in automotive and aerospace industries with approvals from British Aerospace, CAA, Fairey, Lucas, MOD, Westland and other recognised organisations.

x2.5D

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 916.

Metric Sizes - Knurled Cup Point - Self Colour

For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above M6 are generally counterbored to provide maximum clamping efficiency.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour