Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Metric

Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - A2 Stainless Steel

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Bright Zinc Plated

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN914.

Metric sizes - Cone Point - Self Colour

For permanent location of parts. Deep penetration for maximum radial and axial fixing power. Can be used as pivots and where fine adjustment is required.

Qualfast Rivet Nuts

All of our rivet nuts have a clear plating which is RoHS compliant - this is now the preferred finish across all industries as there is no chromium content as is the case with zinc and yellow finish.

Steel, Flat Head, Splined Body

The splines on the body bite into the parent material on installation, creating an improved torque resistance compared with standard round bodied rivet nuts. The large flat head makes the fixing ideal for use in high load bearing situations.

Matlock Oval Brad Nails

Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to DIN 7991.

Metric Sizes - Bright Zinc Plated

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Bright Zinc Plated

Drywall Screws

Hardened carbon steel screws with an extremely corrosion resistant phosphate finish. Self starting needle point and twin threads for fast fixing of dry lining and plasterboard to timber framing and studs without the need for pre-drilling. Bugle head sets the screw to the correct depth without tearing the plasterboard lining paper. The length of screw selected for any specific thickness of board should be sufficient to give 25mm penetration into the timber framing. No. 2 Phillips head.

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - Bright Zinc Plated