Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN914.

Metric sizes - Cone Point - Self Colour

For permanent location of parts. Deep penetration for maximum radial and axial fixing power. Can be used as pivots and where fine adjustment is required.

Drywall Screws

Hardened carbon steel screws with an extremely corrosion resistant phosphate finish. Self starting needle point and twin threads for fast fixing of dry lining and plasterboard to timber framing and studs without the need for pre-drilling. Bugle head sets the screw to the correct depth without tearing the plasterboard lining paper. The length of screw selected for any specific thickness of board should be sufficient to give 25mm penetration into the timber framing. No. 2 Phillips head.

Matlock Annular Ring Shank Nails

Corrosion resistant, prevents wood staining. Annular ring shank
threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.

Spring Tension Pins

Carbon steel. Self colour.

Inch

A2 Stainless Steel - Button Head

Pin Hex security screws with internal pin within the socket - prevents the use of standard hex keys. Suitable for medium torque applications.

A2 Stainless Steel Countersunk Slotted Machine Screws

Manufactured from Stainless steel to prevent rusting or where high temperatures are a consideration.

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (Metric)

Available in packs of 10 and 50.

High Tensile Hexagon Head Bolts

UNC Thread. BS1768, Grade S. Self colour.

Inch (UNC) - Self Colour

A2 Stainless Steel Dome Nuts

Metric. Dome nuts are used for all types of applications, especially where appearance is essential.

Spring Tension Pins

Carbon steel. Self colour.

Metric