产品 / 紧固件/工具
编号：KEN6205505K
●产品描述：
Kennedy Professional Threading Inserts
Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.
Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.
Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.
For all dimensional specifications please refer to our catalogue.
Wire Threading Inserts (Metric)
Available in packs of 10 and 50.
编号：KEN6507060K
●产品描述：
Kennedy Quality Industrial Dowel Pins
Hardened and precision ground. Conform with BS 1804.
Inch
Sizes 1/8" are manufactured from hardened silver steel, 3/16" and above are high quality case hardened mild steel.
编号：KEN6500600K
●产品描述：
Kennedy Quality Industrial Dowel Pins
Hardened and precision ground. Conform with BS 1804.
Metric
Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.
编号：KEN6205508K
●产品描述：
Kennedy Professional Threading Inserts
Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.
Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.
Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.
For all dimensional specifications please refer to our catalogue.
Wire Threading Inserts (Metric)
Available in packs of 10 and 50.
编号：KEN6501190K
●产品描述：
Kennedy Quality Industrial Dowel Pins
Hardened and precision ground. Conform with BS 1804.
Metric
Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.
编号：KEN6154260K
●产品描述：
Kennedy® Fix-it Kits
M5, M6, M8 & M10.
Washers - Disc Lock Metric Ext Kit
编号：KEN6512480K
●产品描述：
Kennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
编号：KEN6501310K
●产品描述：
Kennedy Quality Industrial Dowel Pins
Hardened and precision ground. Conform with BS 1804.
Metric
Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.
编号：KEN6508720K
●产品描述：
Kennedy Quality Industrial Dowel Pins
Hardened and precision ground. Conform with BS 1804.
Inch
Sizes 1/8" are manufactured from hardened silver steel, 3/16" and above are high quality case hardened mild steel.
编号：KEN6501770K
●产品描述：
Kennedy Quality Industrial Dowel Pins
Hardened and precision ground. Conform with BS 1804.
Metric
Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.