Fry Bakers Soldering Fluid No.3

A specially formulated liquid flux that is ideal for soldering and tinning of copper and tinned materials. Easy to apply. Fast acting economical in use, ensuring sound strong joints. For clean, positive joint preparation. For tinned materials and copper. Available in 125ml, 250ml and 10ltr tins.

Fry Fryolux Solder Paint Sn40/Pb60 500gm

Fryolux solder paint is ideally suited to tinning and sweating a variety of materials. The paint should be applied by brush or spray to clean dry surfaces which are in a cold state. As with any flux containing zinc chloride the residues are corrosive and should be washed off the tinned area after soldering.

Frysol A8 Stainless Steel Flux 1Ltr

Frysol A8 is a unique blend of chemicals developed to enable efficient soft soldering to metals such as stainless steels. These metals are difficult to solder due to the tough chromic oxide layer, which is present on the surface of the steel alloys. The free acid within Frysol A8 flux removes these oxides, thus producing a clean surface for the solder to wet.
This product has a shelf life of 36 months from the date of manufacture.

Fry Powerflow Lead Free Wire Solder

Grade 99C.
99% tin, 1% copper. Suitable for plumbing use on potable water systems. 3.25mm diameter. Melting range of 227 - 240C. Available in 250g and 500g.

Powerflow Lead Free Wire Solder 3.25mm

Fry Powerflow Lead Free Wire Solder

Grade 99C.
99% tin, 1% copper. Suitable for plumbing use on potable water systems. 3.25mm diameter. Melting range of 227 - 240C. Available in 250g and 500g.

Powerflow Lead Free Wire Solder 3.25mm

Fry Powerflow Flux 350g

HQ designed to allow strong metallurgical joints in sheet metals and plumbing. Particularly for tin, copper and lead free soldering.

Fry Bakers Soldering Fluid No.3

A specially formulated liquid flux that is ideal for soldering and tinning of copper and tinned materials. Easy to apply. Fast acting economical in use, ensuring sound strong joints. For clean, positive joint preparation. For tinned materials and copper. Available in 125ml, 250ml and 10ltr tins.

Fry Bakers Soldering Fluid No.3

A specially formulated liquid flux that is ideal for soldering and tinning of copper and tinned materials. Easy to apply. Fast acting economical in use, ensuring sound strong joints. For clean, positive joint preparation. For tinned materials and copper. Available in 125ml, 250ml and 10ltr tins.

Fry Fluxite Soldering Paste

For engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution.

Fry Fluxite Soldering Paste

For engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution.