产品 / 手动工具 / 塞尺
品牌
前一页
1
2
3
4
5
6
7
后一页
最后一页
124/12 FEELER GAUGE SET INCH 10-BLADE 12" LONG
编号:M&W5531082M
●产品描述:
Feeler Gauges
Hardened tempered steel blades in polished steel case.
Inch: Manufactured to BS 957 : Parts 1 & 2
10 Blade: .0015", .002", .003", .004", .006", .008", .010", .012", .015" & .025".
0.04mm x 12.7mm FEELER STRIP 300mm LONG
编号:KEN5191040K
●产品描述:
Feeler Stock Strip
These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.
12.7mm x 300mm
390M PRECISION METRIC FEELER GAUGE
编号:M&W5531285X
●产品描述:
Feeler Gauges
Hardened tempered steel blades in polished steel case.
Metric: Manufactured to DIN 2275.
20 Blade: .05, .10, .15, .20, .25, .30, .35, .40, .45, .50, .55, .60, .65, .70, .75, .80, .85, 90, .95 and 1mm.
0.020" x 1/2" FEELER STOCK 20FT COIL
编号:KEN5192400K
●产品描述:
Feeler Stock Coil
This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.
1/2" x 20ft
0.008" x 1/2" FEELER STRIP 12" LONG
编号:KEN5190160K
●产品描述:
Feeler Stock Strip
These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.
1/2" x 12"
4" 10 BLADE IMPERIAL FEELER GAUGE
编号:KEN5180610K
●产品描述:
Feeler Gauges
Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.
Inch: Manufactured to BS 957: 2008 Part 1 Imperial.
10 Blade: .0015", .002", .003", .004", .006", .008", .010", .012", .015" & .025".
0.10mm x 12.7mm FEELER STOCK 7.6M COIL
编号:KEN5193100K
●产品描述:
Feeler Stock Coil
This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.
12.7mm x 7.6m
0.0015" x 1/2" FEELER STRIP 12" LONG
编号:KEN5190030K
●产品描述:
Feeler Stock Strip
These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.
1/2" x 12"
4" 10 BLADE METRIC FEELER GAUGE
编号:KEN5180710K
●产品描述:
Feeler Gauges
Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.
Metric: Manufactured to BS957: 2008 Part 1 Metric.
10 Blade: .05, .10, .15, .20, .30, .40, .50, .60, .70, & .80mm.
MET/IMP FEELER GAUGE 75mm BLADE LENGTH
编号:SEN5185790K
●产品描述:
Double-Ended Feeler Gauge
Industrial quality with hardened and polished blades which fold into a steel case. Each blade is etched with its size for ease of use. 18 blades cover metric and imperial sizes. Manufactured to BS957:1941 Part 1 (Imperial) & BS957: 2008 Part 1 (Metric). 18 Blade: Metric Range: 0.05, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4 & 0.5mm. Inch Range: .0015", .002", .003", .004", .006", .008", .010", .012", .015" & .025".
前一页
1
2
3
4
5
6
7
后一页
最后一页