产品 / 手动工具 / 螺丝批系列
编号：KEN5738094K
●产品描述：
1/4" Hexagon Titanium Coated Screwdriver Bits
Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.
编号：KEN5724080K
●产品描述：
Engineers' & Electricians' Screwdrivers
Kennedy Engineers' & Electricians' Screwdrivers have a traditional fluted design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.
Flared - Square Blade
Square bladed screwdrivers can be gripped in a spanner or locking wrench to allow greater torque to be applied from the side rather than from directly above the screwdriver.
编号：KEN5738082K
●产品描述：
1/4" Hexagon Titanium Coated Screwdriver Bits
Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.
编号：KEN5725790K
●产品描述：
Electricians VDE Square Section Handle Screwdrivers
Volt-tested to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
编号：KEN5720400K
●产品描述：
'Hi-Grip' Screwdrivers
Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
Flared
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.
编号：KEN5732440K
●产品描述：
5/16" AF Hexagon Drive Screwdriver Bits
All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.
Crosspoint
编号：KEN5736150K
●产品描述：
1/4" AF Hexagon 'Direct Drive' Bit Adaptors
1/4" hexagon shank with ball recess. For use with insert bits.
Magnetic with Retainer
编号：KEN5720120K
●产品描述：
'Hi-Grip' Screwdrivers
Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 driver is suitable for most applications.
编号：KEN5723630K
●产品描述：
High Grip Pound Thru' Screwdrivers
Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.
Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 screwdriver would be suitable for most applications.
编号：KEN5738216K
●产品描述：
5/16" Hexagon Titanium Coated Screwdriver Bits
Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.