Copely Polyurethane Tube

CPU Series
Codeflex polyurethane tube is suitable for a wide range of applications demanding a flexible and cut resistant tube in applications such as pneumatic control systems and chemical transfer tubing. Codeflex polyurethane is well suited to applications demanding maximum kink resistance, minimum kink memory. It is suitable for fitting into confined spaces where conventional tubes lacking the above factors would increase fitting time in addition to flow restriction.

Applications:
Pneumatic control systems.
Fuel and lubrication lines.
Chemical transfer tubing.
Special features:
Exceptional abrasion resistance.
Resistance to a wide range of chemicals.
High flexibility.
Silicone-free.
Working pressures:
Nominal working pressure calculated at 23C with a 4.1 safety factor.
Temperatures: -50C/55C (short term use at 85C).
Special note:
The CPU series has been designed and developed to meet the exacting standards of the push fit type of coupling.
Supplied as 30 metre coils.

Copely Low Density Polyethylene Tube

LDP Series
Low density polyethylene tube has been greatly used for many years in a wide variety of applications. It has mainly been associated with the conveyance of beer and soft drinks for the brewery industry and water for domestic services, however it is suitable for many applications requiring a relatively low cost material and has good resistance to many liquids and chemicals. It has also been used in the pneumatics field in spite of its low abrasion and cut resistance.

Special features:
Resistant to a wide range of chemicals.
High flexibility.
Silicone free.
Supplied in 30 metre coils.

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Copely Low Density Polyethylene Tube

LDP Series
Low density polyethylene tube has been greatly used for many years in a wide variety of applications. It has mainly been associated with the conveyance of beer and soft drinks for the brewery industry and water for domestic services, however it is suitable for many applications requiring a relatively low cost material and has good resistance to many liquids and chemicals. It has also been used in the pneumatics field in spite of its low abrasion and cut resistance.

Special features:
Resistant to a wide range of chemicals.
High flexibility.
Silicone free.
Supplied in 30 metre coils.

Copely Industrial Layflat Hose

LHM Series
Medium duty yellow industrial layflat hose - LHM series. Medium pressure, flat hose manufactured from plasticized PVC and reinforced with polyester yarns. For conveyance of water, other liquids or fertilizers. Also suitable for irrigation systems, sprinklers and water supply. Colour Blue.

Special features:
Made from cadmium free materials.
Resistance to a wide range of chemicals.
Silicone free.
Abrasive resistant.
Good flexibility.
Long service life.
Minimal electrical conductivity.
Tough, puncture-proof.
Fast transfer of liquids.
Unaffected by the elements.
Operating temperature: -25C/60C.
Supplied in 10 metre coils.

Medium Duty Yellow

Copely Suprene Fluted Water Hose

GPW Series
General-purpose, Suprene fluted water hose is fully flexible and is available from 13mm through to 25mm and exceeds the requirements laid down in BS 3746. Colour black. Supplied in 50m coils.

Special features:
Excellent abrasion resistance.
Manufactured from cadmium free materials.
Resistance to a wide range of chemicals.
Outstanding U.V/Ozone resistance.
Silicone free.
Flexible.
High quality fluted water hose.
Medium duty cold water hose.

Copely Industrial Layflat Hose

LHM Series
Medium duty yellow industrial layflat hose - LHM series. Medium pressure, flat hose manufactured from plasticized PVC and reinforced with polyester yarns. For conveyance of water, other liquids or fertilizers. Also suitable for irrigation systems, sprinklers and water supply. Colour Blue.

Special features:
Made from cadmium free materials.
Resistance to a wide range of chemicals.
Silicone free.
Abrasive resistant.
Good flexibility.
Long service life.
Minimal electrical conductivity.
Tough, puncture-proof.
Fast transfer of liquids.
Unaffected by the elements.
Operating temperature: -25C/60C.
Supplied in 10 metre coils.

Medium Duty Yellow

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Copely Low Density Polyethylene Tube

LDP Series
Low density polyethylene tube has been greatly used for many years in a wide variety of applications. It has mainly been associated with the conveyance of beer and soft drinks for the brewery industry and water for domestic services, however it is suitable for many applications requiring a relatively low cost material and has good resistance to many liquids and chemicals. It has also been used in the pneumatics field in spite of its low abrasion and cut resistance.

Special features:
Resistant to a wide range of chemicals.
High flexibility.
Silicone free.
Supplied in 30 metre coils.