Door Controls

This comprehensive range of Door Controls feature varying power sized units for many different door applications. They come with a choice of architectural covers which are each available in 26 different plated or colour coated finishes.
To help select the correct closer for you, each unit has a listing showing their key features, certification numbers and fire ratings. Plated arms are available on certain units only, and test certificates are available upon request.

BS EN1154 Classification
This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performance requirements.
Digit (1) - Category of use:
?3? denotes the unit is for closing doors from at least 105.
?4? denotes the unit is for closing doors from 180 open.
Digit (2) - Durability:
?8? successfully completed 500,000 test cycles.
Digit (3) - Test door mass/size:
Seven grades are identified as shown in the table below (where a
closer provides a range of power sizes both the minimum and
maximum sizes shall be shown):
Power size Test door mass Recommended door leaf width
1 20kg 750mm
2 40kg 850mm
3 60kg 950mm
4 80kg 1100mm
5 100kg 1250mm
6 120kg 1400mm
7 160kg 1600mm
Digit (4) - Fire behaviour:
?0? denotes the unit is NOT suitable for use on fire/smoke doors.
?1? denotes the unit IS suitable for use on fire/smoke doors.
Digit (5) - Safety in use:
?1? all door closer units are required to stisfy the essential requirement of safety in use.
Digit (6) - Corrosion-resistance:
?0? - indicates no defined corrosion-resistance,
?1? - indicates mild corrosion-resistance,
?2? - indicates a moderate level of corrosion-resistance,
?3? - indicates high corrosion-resistance,
?4? - indicates very high corrosion-resistance.
Within this section units have been tested to BS EN1154, with many units also having been tested to current Certifire testing and CE test criteria. Therefore, the 6 digit classification is shown against each of the varying units, thus indicating their performance and grading under BS EN1154.

An example of the grading for a 1559 closer unit would be as follows:

3 8 4/2 1 1 3
(1) (2) (3) (4) (5) (6)

Electro-Magnetic Fire Stay - Plated Finish

Plated finish. Electro-magnetic holds open fire doors but releases in the event of fire. Closing force size 4 (EN1155). Maximum door width 950 - 1100mm. Suitable for doors 60 - 80kg. Adjustable check action. Adjustable latch action. Hold open from 70 - 180. Two cover options available for this unit.

Suffolk Latches

Suffolk latches complete with long thumb bit.

Matlock Round Bar Levers

119/1
Aluminium finish. 19mm return to door DDA aluminium sprung lever on concealed oblong. Backplate 153 x 45mm. DDA & BS8300 Compliant.

Straight Bands & Hooks

Supplied packed in pairs in a polythene bag and complete with all fixing screws and bolts. Supplied individually, boxed in 5's.

Steel Flat Tee Plate

Provide essential rigidity to assemblies and reinforce joints. Bright zinc plated steel. Five screw holes. Size: 75mm.

Spring-Loaded Bolts

Spring-loaded bolt suitable for metal or wooden gates.

Euro Profile Deadlock Case - Polished Brass Finish

715
For internal and external door use. 64mm (2 1/2?) case size available. Brass or nickel plated forend and strike. Supplied with square or radius forend and strike. Polished brass finish.

Matlock Door Stops

Projecting door stop. Finished in aluminium, stainless steel and brass. Size: 75mm.

Matlock Round Bar Pull Handles

Polished brass finish. 19mm roundbar pull handles.

Bolt Through (19mm dia)

Matlock Blank Push Plates

Finished in aluminium, stainless steel and brass. Size: 305 x 75mm.