Bullett Fan Heater

18kW or 9kW fan only settings for cooling. Runs from 3 phase 415V supply. Powerful alternative to propane. High efficiency incolloy elements for optimum heating & safety. High volume heated air output. Mounted on castors for easy portage. Fully stackable quiet running, rugged all steel industrial design. Duct lengths in excess of 10 metres (30 ft plus) can be attached to the FF18 where the need arises. Dimensions (H x D x W): 570 x 520 x 400mm. Airflow: 1200 cfm. (2040mh) 400 Pascal pressure generation.

FF18

Bullett Man Cooler Fans

Very high quality, highly engineered specification large portable fans, for both cooling and ventilation purposes. Ideal for use as a man cooler where there are large areas of space with multi occupancy, or in conjunction with portable air conditioning equipment. Attractive impact-resistant body in tough ABS. Supplied mounted on epoxy coated tubular steel stand. Fully adjustable stand. Stepless speed controls from stationary to maximum. 230V and 110V models available. Supplied complete with 2.5m cable.

MB30

Air output: 3000 cfm. Dimensions in mm (upright):(H)625 x (D)225 x (W)550. Weight: 10 kg. Colour: Graphite. Speed control: Infinitely variable from zero - 1350 rpm. Average running current approx. 1A. Average running load approx. 250W. Typical noise levels (1m, 90 from air stream): 40dBA (low speed), 56dBA (high speed).

Bullett Dehumidifier

Very high quality, highly engineered specification large portable fans, for both cooling and ventilation purposes. Ideal for use as a man cooler where there are large areas of space with multi occupancy, or in conjunction with portable air conditioning equipment. Attractive impact-resistant body in tough ABS. Supplied mounted on epoxy coated tubular steel stand. Fully adjustable stand. Stepless speed controls from stationary to maximum. 230V and 110V models available. Supplied complete with 2.5m cable.

FloodBoy

Nominal, maximum extraction of 28 litres per day via advanced refrigerant circuit. Economical, consumes only about 1 amp. Runs from 240v and 110v, or 240v only supply. Rugged steel construction with 'Plastisol' covering. Fitted with electronic 'tough' hour counter as standard. Special 18mm waste pipe to prevent clogging. Removable drip tray for regular, easy cleaning. Wide fin pitch to prevent 'coil clogging' with airborne debris. Dimensions (H x W x D): 500 x 320 x 365mm. Airflow (average): 120cfm. Electricity consumption: 1.1A (at 60% R.H, 15/20C). Colour: Ocean Blue.

Bullett Fan Heater

Lightweight, quiet running and compact industrial fan heater with 3kW heat output. Developed to give large heated air volume with its up rated air moving system. All steel industrial construction is designed to be fully stackable and uses high efficiency incolloy elements to give safe reliable operation. Weight 8kg. 430 cubic mm/hour heated air volume. Available in 110V (32Amp) and 240V (13Amp). Dimensions (H x D x W): 360 x 330 x 300mm.

FF3

Bullett Man Cooler Fans

Very high quality, highly engineered specification large portable fans, for both cooling and ventilation purposes. Ideal for use as a man cooler where there are large areas of space with multi occupancy, or in conjunction with portable air conditioning equipment. Attractive impact-resistant body in tough ABS. Supplied mounted on epoxy coated tubular steel stand. Fully adjustable stand. Stepless speed controls from stationary to maximum 230V and 110V models available. Supplied complete 2.5m cable.

MB50

Air output: 6500 cfm. Dimensions in mm (upright):(H)830 x (D)280 x (W)800. Weight: 17 kg. Colour: Graphite. Speed control: Infinitely variable from zero - 1350 rpm. Average running current approx. 2A. Average running load approx. 550 - 600W. Typical noise levels (1m, 90 from air stream): 42dBA (low speed), 58dBA (high speed).

Bullett Man Cooler Fans

Very high quality, highly engineered specification large portable fans, for both cooling and ventilation purposes. Ideal for use as a man cooler where there are large areas of space with multi occupancy, or in conjunction with portable air conditioning equipment. Attractive impact-resistant body in tough ABS. Supplied mounted on epoxy coated tubular steel stand. Fully adjustable stand. Stepless speed controls from stationary to maximum 230V and 110V models available. Supplied complete 2.5m cable.

MB50

Air output: 6500 cfm. Dimensions in mm (upright):(H)830 x (D)280 x (W)800. Weight: 17 kg. Colour: Graphite. Speed control: Infinitely variable from zero - 1350 rpm. Average running current approx. 2A. Average running load approx. 550 - 600W. Typical noise levels (1m, 90 from air stream): 42dBA (low speed), 58dBA (high speed).

Bullett Fan Heater

Lightweight, quiet running and compact industrial fan heater with 3kW heat output. Developed to give large heated air volume with its up rated air moving system. All steel industrial construction is designed to be fully stackable and uses high efficiency incolloy elements to give safe reliable operation. Weight 8kg. 430 cubic mm/hour heated air volume. Available in 110V (32Amp) and 240V (13Amp). Dimensions (H x D x W): 360 x 330 x 300mm.

FF3

Bullett Man Cooler Fans

Very high quality, highly engineered specification large portable fans, for both cooling and ventilation purposes. Ideal for use as a man cooler where there are large areas of space with multi occupancy, or in conjunction with portable air conditioning equipment. Attractive impact-resistant body in tough ABS. Supplied mounted on epoxy coated tubular steel stand. Fully adjustable stand. Stepless speed controls from stationary to maximum. 230V and 110V models available. Supplied complete with 2.5m cable.

MB30

Air output: 3000 cfm. Dimensions in mm (upright):(H)625 x (D)225 x (W)550. Weight: 10 kg. Colour: Graphite. Speed control: Infinitely variable from zero - 1350 rpm. Average running current approx. 1A. Average running load approx. 250W. Typical noise levels (1m, 90 from air stream): 40dBA (low speed), 56dBA (high speed).

Bullett Vent Extractors

Vent extraction units are ideal for removing fumes from welding bays, warehouses, tunnels, basements, chemical laboratories or anywhere where fumes are posing a problem. Sturdily built in steel with a moulded plastic handle the units are available in two diameters 200 or 300mm.
Supplied with 5M flexible ducting.