Granlund Size 1 Pilots

Type F Fixed Tol. c9.

When working ?dry? type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.

For all technical specifications please refer to our catalogue.

Granlund HSS Size 1 Counterbores

Type W. HSS. Tolerence P8.

Counterbores W with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.

Kennedy® Industrial Drill Chuck Arbors

Precision machined, fully hardened & ground to give maximum surface contact.

KD Type - Morse Taper Shank to Din Taper Arbors

Fully hardened and ground Morse Taper to DIN 228.
Chuck taper to DIN 238.

Pinzbohr Boring Systems



Bohrstar 54 Boring System Kit

The Bohrstar 54 kit from Pinzbohr delivers the following features and benefits:
High strength and rigidity that is required for accuracy and repeatability.
A V-groove locking insert cartridge for improved rigidity.
All the compents of the kit are manufactured from nickel-chromium alloy.
Tapered Screw and Locking Pin Coupling
Tapered screws for most rigid coupling.
Dampens vibration under load.
Pin guarantees accurate head position.
Saves you money on tooling costs.
Saves time on the shop floor.
Performance guarantee.
The Bohrstar kit components are easy to install and require no special training or tools to use.

Boring range: 8 ~ 170mm.
Accuracy: to 0.0001
Bohrstar Kit Contents:
1x 54mm Bohrstar head with accu-set dial (38 ~ 59mm).
6x boring bars (8 ~ 43mm).
2x adaptor plates with cartridge insert (83 ~ 170mm).
Also includes counterweight, adjusting key, location sleeve, hexagon key, Torx key and fixing screws.

For all technical specifications please refer to our catalogue.

Allied Maxcut GEN3SYS? High Penetration Drilling System

The innovative GEN3SYS? system is designed for use with both ferrous and non-ferrous materials to provide high metal removal rates, increased hole accuracy and true position, as well as high quality finish. Using a unique helical geometry with high axial and radial rakes, the GEN3SYS? insert profile delivers optimum chip forming with elastic materials, such as structural steel and alloys, without compromising chip control on other materials. Carbide substrates, K35, K20 and K10 general purpose and cast iron geometries are available along with Allied Maxcut's proprietary AM200? coating as standard. Other coatings are also available as non stocked standards.

Drill diameter range: Metric: 12 - 32mm. Inch: 0.4844" to 1.250".
Drill depth: available in 3x, 5x and 7x diameters.
Flute types: Straight or Helical.

For further details of the complete GEN3SYS? range please contact your local branch.

GEN3SYS? 16 Series Holder Range

Indexa-Seiki Tapping Collets

Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.

For all technical specifications please refer to our catalogue.

DIN SZ1

Indexa-Seiki FM - Face Mill Adaptors

From an extensive programme of quality spindle nose tooling, used with an extensive range of face and shell mills

Indexa-Seiki? ER Collets

Indexa-Seiki? ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.

When Indexa-Seiki? ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.

ER Collet Set

Indexa-Seiki? ER Collets are available in the in a range of sizes to maximise efficiency in most applications, they are manufactured from hardened and tempered high alloy steel. All supplied in hardwearing bench cases with protective foam inserts.

Conform to DIN 6499.
Up to 10.0mm - 0.015mm TIR.
11.0 to 18.0mm ? 0.015 to 0.020mm TIR.
19.0 to 26.0mm ? 0.015 to 0.020mm TIR.

For all technical and dimensional specifications please refer to our catalogue.

Granlund Carbide Size 1 Counterbores

Type H. Carbide K40 micrograin. Tolerance P8.

Counterbores H with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.

Milling Body and Insert Sets

90° approach with centre screen clamping. Utilising the APKT 1604 inserts. Produces square stepless shoulders, wide slots and deep profiles. Insert size: APKT 1604 PDTR. XP - Xtra Plasma Coated Body.

XP-90C Shell Mills c/w 2 sets of APKT Inserts