Pinzbohr Standard Arbors

A comprehensive flexible boring system available for use on the majority of conventional and CNC machines.

Weldon Shanks

Weldon shank standard arbors.

Granlund Size 1 Pilots

Type RS Roller Tol. c9.

When working 'dry' type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.

For all technical specifications please refer to our catalogue.

Indexa-Seiki ER - Collet Chucks

The Indexa-Seiki ER Collet chuck is manufactured as part of Europe's most popular collet system. The collapsing collet design can be used for a range of diameters and maintains concentricity for drilling and milling. Long reach options are also available to give access into deep recesses. Balanced to 12,000rpm. Max Tir 0.010mm. (BT BT-MAS 403)

Straight Shank

PSC and PSCa (adjustable) Collets for Plain Shank Cutters

Tru-Loc Collets are available for plain shank cutters in two different styles, PSC non adjustable and PSCa - Collets with an adjustable back-stop screw to allow more accurate & consistent cutter replacement.

For all dimensional specifications please refer to our catalogue.

PSC(a) Type

Granlund Size 1 Pilots

Type F Fixed Tol. c9.

When working ?dry? type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.

For all technical specifications please refer to our catalogue.

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 60HRC. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

E2-1 Boring Bar Sleeves

Allied Maxcut Series 5 Inserts

Diameter range: 63.50 to 76.20mm

For all dimensional specifications please refer to our catalogue.

Granlund HSS Size 1 Counterbores

Type N. HSS. Tolerence P8.

Counterbores N with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.

Allied Maxcut Accuport 432 Port Contour Cutter Kits

In order to better align with the metric port specification ISO-6149, AMEC has updated some features of our metric AccuPort 432 tools. Since the AccuPort 432 Port Contour Cutter is the only indexable tool in the industry that can produce the drilled hole and the port form in one step, dimensions were changed to produce the most capable forms possible. By setting dimensions to the nominal values, the resulting port form will be well within acceptable tolerance requirements. Dimensions that were updated related primarily to the ID ridge diameter, pilot length, seal angle diameter, and spotface diameter.

Patent Pending System
? One operation Port Hole Drilling System.
? No pre-drilling necessary.
? Excellent tool life.
? Lower tool costs.
? Through body coolant
? Eliminates regrinding and resetting
? Reduced cost per port

AccuPort 432 Port Form Inserts provide
? Absolute repeatability.
? Excellent surface finish.
? Coated Inserts for longer tool life and increased productivity.
? Now available in C3 Carbide with AM200 for increased performance in cast iron applications.

AccuPort 432 AccuThread 856 J1926 Ferrous Material Kits
Available to provide all the tooling necessary to create the finished port.
Includes AccuPort 432 Body, all Inserts, and an AccuThread 856 Threadmill.

Accuport 432 Port Contour Cutter KIts

Indexa-Seiki Standard Pull Studs

ISO 7388/2 (DIN 69871/A) (SQ Square Shoulder)