Disposable Gas Cylinders

Suitable for MIG/MAG Welders. Supplied Separately.

Mig Welders

Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual overide. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Extra Low current performance - Able to deliver a 30A minimum output for welding very thin material easily. Accepts 0.7kg or 5kg spools for maximum portability and economy. Heavy duty case for durability. Can be used for flux (no gas) and Mig/Mag (gas) welding. Four position, stepped voltage regulator allows process selection to be pre-set. Supplied complete with a smooth action, twin roller feed unit, accessories, two large diameter solid wheels and 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. 2 year warranty. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21.

Leopard EMW-150 Dual MIG Welder

Welding capacity: steel wire: 0.6 - 0.8mm, stainless steel wire: 0.8mm, aluminium wire: 0.8 - 1.0mm, flux cored welding wire: 0.8mm 1.2. Maximum reel size: 5kg.Input voltage: 230V, 50/60Hz. Fuse rating: 16A. Phase: 1. Power consumption: 3.7kW max. (1.4kW 60%). Output current range: 30A - 145A (DC). Open circuit voltage: 31V. Dimensions: (L x W x H) 680 x 285x 410mm.
Contents: LeopardTM EMW-150 power supply. 1.8m cable, 10mm2. Earth clamp, 150A. 2m Mig torch, 160A. Flux cored wire coil 0.9mm x 0.2kg. Hand held face shield with 51 x 107mm glass. Scratch brush and slag remover. Instruction manual.

Cemont BluMig Mig Welders

A range of compact Mig Welders for your choice of applications

BluMig 241C Professional Compact Mig Welder (Replaces Compact 241M).

Professional compact Mig welder with heavy duty four roll feed system with auto adjusting wire speed, slope up and burnback control, welding timer, fan cooling and thermal
protection.
IP22 Class protection.
240V single phase input.
20A fuse rating.
Power input: 8.2kW
Duty cycle: 240A 35%
Welding current range: 40 - 240 amps.
Weight: 52.0kg.
Dimensions:500 x 870 x 950mm.

CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 503S Professional Separate MIG/MAG Welder

Large robust casing.
Welding current range: 35-500amps.
30 welding steps.
Wire sizes: 0.8-1.6mm.
Dimensions: 600 x 1250 x 1050mm.
Weight: 140kg.
5m or 10m wire feed inter connector link options.

Panther EMW-120 Dual MIG Welder

A high power single phase welder that operates from a standard 240V household outlet. Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual overide. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Low current performance - Able to deliver a 50A minimum output for welding thin material easily. Variable wire spool size capability - Accepts both 0.7kg and 5kg spools for maximum portability and economy. Heavy duty redesigned case for durability combined with low weight and portability. Can be used for flux (no gas) and Mig/Mag (gas) welding. Four position, stepped voltage regulator allows process selection to be pre-set. Safety features include fan cooling and thermal protection. Supplied complete with a smooth action, twin roller feed unit, accessories, integrated carrying handle and 2m mains cable. Ready to use and fully portable. Suitable for automotive, farm, maintenance and contractor use. 2 year warranty. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21.

Input voltage: 230V, 50/60Hz.
Fuse rating: 10A.
Phase: 1.
Power consumption: 3.6kW max. (1.3kW60%).
Output current range: 50A - 120A (DC).
Open circuit voltage: 30V.
Dimensions: (L x W x H) 480 x 275 x 380mm.

MIG Welder

CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 353S Professional Separate MIG/MAG Welder

Welding current range: 40-350amps.
14 welding steps.
Wire sizes: 0.6-1.2mm.
Dimensions: 500 x 1180 x 950mm.
Weight: 93kg.
4m or 10m wire feed interconnector link options.

Kennedy 0.6-0.8mm Feed Roll

To suit Kennedy Lion and Tiger Mig Welders.

Disposable Gas Cylinders

Suitable for MIG/MAG Welders. Supplied Separately.

Portable MIG/MAG Welding Unit

Used for MIG/MAG welding of mild steels for repair, maintenance and assembly work. This easy to use and powerful unit, offers excellent welding properties and is easy to take along to the job at hand. The performance of this unit makes it a superb choice for mild steel welding applications. Perfect for tradesmen working with repair, maintenance or assembly work in the workshop, outdoors or at different sites. Single phase mains connection makes it easy to find a electricity supply. Works equally as well when powered by a portable generator.
Standards IEC/EN 60974-1, EN 60974-05, EN 60974-10
Maximum welding output: 160 Amps
Permitted load, at 40oC:
35% duty cycle, 150/20.5A/V
100% duty cycle, 100/19A/V
Setting range: 30-160A
Open circuit voltage: 60V
Wire feed speed: 2 ? 11m/min
Max. size of the wire reel: 200mm, 5kg
Open circuit power: 15W
Dimensions (LxWxH): 449x198x347mm
Weight with torch & cables: 11.4kg

Caddy Mig C160i

SIP Trade Autoplus Dual Purpose MIG Welder Range

Two heavy duty, professional MIG welders 181DP (0479)and 211DP (04793) combine fantastic quality, durability and value-for-money. These newest additions to the SIP range are packed with superb features and are perfect for any busy automotive garage or workshop. Both models complete with professional Euro connection MIG torch with 3M cable, gas hose, 5kg spacer, link cable, earth lead, welding mask, wire brush and chipping hammer, 3x wire feed rollers.

Trade Autoplus 211DP MIG Welder

04793
With low current performance for better welding on bodywork. Smoothing capacitor for exceptional welding consistency on very thin material. Digital voltmeter and ammeter to monitor welding performance. Heavy duty, durable transformer for maximum reliability. Turbo-fan cooled for increased duty cycle. Wheel mounted. Gas and gasless.

Specifications:
Supply: 230V (42amp).
Welding current: 30 - 210amp.
Output @60% duty cycle: 135amp.
Wire size: 0.6 - 1.0mm steel/0.8mm aluminium/0.8mm cored.
Wire spool size: 5 - 15kg.
Approx. weld thickness range: 0.8 - 9mm (mild steel).
Power settings: 6.
Weight: 64kg.