Bratt?s Glass Fibre Work Platforms

Non-conductive extra wide platform steps. Offers up to four metres working height. 360 working platform. Glass fibre frame with aluminium treads. Enclosed platform on three sides for safety. Insulated and non-conductive whilst in use. HSE Work At Height Regulations 2005 compliant to work two-handed for short duration jobs. Kitemarked BS EN 131 and complies to ANSI 14-5 and ESI 13-1. Choice of 2 - 11 tread models.

Vision 360 Glass Fibre Work Platform with Aluminium Treads - XPLT

Safety Bridging System - BRD-GF

A simple Glassfibre bridging system that will span desks, machinery and workbenches, enabling safe access with minimum disruption. Manufactured from BS compliant materials, the Bridge is adjustable for height and folds flat for storage and transportation. Non-conductive handrails available. We can also tailor make the Bridge to your own specification if required.

Bratt?s Glass Fibre Work Platforms

Non-conductive extra wide platform steps. Offers up to four metres working height. 360 working platform. Glass fibre frame with aluminium treads. Enclosed platform on three sides for safety. Insulated and non-conductive whilst in use. HSE Work At Height Regulations 2005 compliant to work two-handed for short duration jobs. Kitemarked BS EN 131 and complies to ANSI 14-5 and ESI 13-1. Choice of 2 - 11 tread models.

Vision 360 Glass Fibre Work Platform with Aluminium Treads - XPLT

Bratt?s Timber Step Ladders

Heavy construction for industrial use. Manufactured from Douglas fir, morticed, tenoned, glued and wedged. Hinged to the back board and bolted through the stiles for extra strength. Treads at 250mm rise, pinned with ring shank nails and fitted with check blocks at intervals to prevent sideways movement. Tie rod are fitted at not more than 4 treads apart. All with varnished finish and all metal fittings are rust proofed. Manufactured to BS1129 Class 1 and Kitemarked.

Swingback Timber Platform Step Ladder - HPS

Bratt?s Glass Fibre Step Ladders

Manufactured from distinctive yellow 85mm x 31mm glass fibre channel. 140mm x 325mm plastic coated top is used to pivot the back legs and support the stiles. Stays are fitted to prevent sideways movement. 45 x 35mm glass fibre channel is used to manufacture the rear legs and braces make a rigid and lightweight construction. The serrated solid rubber blocks and glass fibre stiles make these steps safe for use in all environments. Aluminium treads are angled at 67 to the stiles offering excellent grip and strength to the construction. Glass Fibre treads are angled at 67 to the stiles and at 250mm centres. For use in areas where minimum metal content is required and/or clean environments (health, chemical, food and computer industries). Manfactured to ANSI 14-5 and ESI 13-1. Kitemarked BS EN 131.

Swingback Glass Fibre Step Ladder with Aluminium Treads - GSB

Bratt?s Glass Fibre Work Platforms

Non-conductive extra wide platform steps. Offers up to four metres working height. 360 working platform. Glass fibre frame with aluminium treads. Enclosed platform on three sides for safety. Insulated and non-conductive whilst in use. HSE Work At Height Regulations 2005 compliant to work two-handed for short duration jobs. Kitemarked BS EN 131 and complies to ANSI 14-5 and ESI 13-1. Choice of 2 - 11 tread models.

Vision 360 Glass Fibre Work Platform with Aluminium Treads - XPLT

Bratt?s Timber Step Ladders

Heavy construction for industrial use. Manufactured from Douglas fir, morticed, tenoned, glued and wedged. Hinged to the back board and bolted through the stiles for extra strength. Treads at 250mm rise, pinned with ring shank nails and fitted with check blocks at intervals to prevent sideways movement. Tie rod are fitted at not more than 4 treads apart. All with varnished finish and all metal fittings are rust proofed. Manufactured to BS1129 Class 1 and Kitemarked.

Swingback Timber Platform Step Ladder - HPS

Bratt's Timber Ladders

Bratt's timber ladders are manufactured from Douglas fir for the stiles and American Ash is used for the rungs; which are glued and pinned into blind holes at 250mm centres. All British standard ladders over 3.63M closed have automatic latching. It is recommended that two section ladders over 4.75M closed length and three section ladders over 3.00M closed length should be rope operated. All with varnished finish and all metal fittings are rust proofed. Manufactured to BS1129 Class 1.

Double Section Push Up Timber Ladder - HHD

Bratt?s Glass Fibre Step Ladders

Manufactured from distinctive yellow 85mm x 31mm glass fibre channel. 140mm x 325mm plastic coated top is used to pivot the back legs and support the stiles. Stays are fitted to prevent sideways movement. 45 x 35mm glass fibre channel is used to manufacture the rear legs and braces make a rigid and lightweight construction. The serrated solid rubber blocks and glass fibre stiles make these steps safe for use in all environments. Aluminium treads are angled at 67 to the stiles offering excellent grip and strength to the construction. Glass Fibre treads are angled at 67 to the stiles and at 250mm centres. For use in areas where minimum metal content is required and/or clean environments (health, chemical, food and computer industries). Manfactured to ANSI 14-5 and ESI 13-1. Kitemarked BS EN 131.

Swingback Glass Fibre Step Ladder with Aluminium Treads - GSB

Bratt?s Glass Fibre Work Platforms

Non-conductive extra wide platform steps. Offers up to four metres working height. 360 working platform. Glass fibre frame with aluminium treads. Enclosed platform on three sides for safety. Insulated and non-conductive whilst in use. HSE Work At Height Regulations 2005 compliant to work two-handed for short duration jobs. Kitemarked BS EN 131 and complies to ANSI 14-5 and ESI 13-1. Choice of 2 - 11 tread models.

Vision 360 Glass Fibre Work Platform with Aluminium Treads - XPLT