产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：RTB2886020C
●产品描述：
Pilot Pins
For use with all multi-tooth milling cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for 'blind' or 'through' pilot holes, pin will retract into cutter adapter on 'bottoming'. Short series equals 12mm cutter. Long series equals 13-52mm cutters.
编号：KEN2884130K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
For use with Magtron broaching units, drill presses, lathes etc.
Morse Taper Adaptors
编号：KEN2875720K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：KEN2882480K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Long Series
Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.
编号：KEN2881170K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KEN2874820K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：SEN2877620K
●产品描述：
Senator® Router Cutters
For panel mould on cabinets and drawer fronts.
Ogee Bit
编号：KEN2953120K
●产品描述：
Kennedy® Wire Wheels & Brushes
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Cup Brushes - Shaft Mounted
For all round use, ideal for work on larger surfaces removing burrs, rust and paint. 6mm Shanks. 30 SWG.
编号：KEN2873800K
●产品描述：
Kennedy® Router Cutters
With ball bearing guide. For edge mould on coving, picture frames, etc. Self guiding with ball bearing.
Two Flute Cove Bits
编号：KEN2957440K
●产品描述：
Kennedy® Wire Wheels & Brushes
For use in high speed air and electrical tools. Ideal for hard to reach areas. For the removal of paint, carbon and for de-burring. 6mm Shanks. 30 SWG
Brush manufactured from Steel wire and holder and shank manufactured from galvanized steel.
Pointed End Decarbonising Brushes