产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：KEN2873340K
●产品描述：
Kennedy® Router Cutters
Rough Bottom. Used to produce flat bottom panel mould on cabinet and drawer fronts. Can also be used for edge mouldings.
Two Flute Classical Plunging Bits
编号：KEN2875100K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：KEN2881420K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KEN2881200K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KEN2875260K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：KEN2873520K
●产品描述：
Kennedy® Router Cutters
With Ball Bearing Guide. To trim laminate producing a bevelled edge. With ball bearing guide suitable for straight or shaped work.
Bevel Edge Trimming Bits
编号：KEN2870120K
●产品描述：
Kennedy® Router Cutters
For cutting grooves/apertures and general shaping work. Single flute for maximum support behind the cutting edge, giving strength, while providing large clearance for ease of chip flow promoting fast free cutting.
Single Flute Straight Plunging Bits
编号：KEN2874540K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：KEN2872380K
●产品描述：
Kennedy® Router Cutters
Combination tool to trim plastic or laminate facing. To produce a square or bevelled edge.
Two Flute Flush & Bevel Trimming Bits
编号：KEN2957320K
●产品描述：
Kennedy® Wire Wheels & Brushes
For use in high speed air and electrical tools. Ideal for hard to reach areas. For the removal of paint, carbon and for de-burring. 6mm Shanks. 30 SWG
Brush manufactured from Steel wire and holder and shank manufactured from galvanized steel.
Pointed End Decarbonising Brushes