产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：KEN2891730K
●产品描述：
Bosch Style Chisels
Suitable for air and electric hammers and breakers, for all classes of work.
For Bosch: USH10, 11305, 12312. Spit: 400. 19mm Hex Shank with Single Flat.
编号：KEN2871580K
●产品描述：
Kennedy® Router Cutters
With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
Two Flute Flush Trimming Bits
编号：KEN2875500K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：KEN2881480K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KEN2805380K
●产品描述：
Kennedy® Buffing & Polishing Foams
Ultra soft reticulated foam for final polishing/finishing. Designed to allow free flow of air.
Red Final Polishing Foam Buffing Pads
编号：KEN2872100K
●产品描述：
Kennedy® Router Cutters
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.
Two Flute Rounding Over Bits
编号：KEN2959290K
●产品描述：
Kennedy® Wire Wheels & Brushes
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Additional Side Plates for Circular Brushes
Supplied free of charge with circular brushes. Please specify when ordering.
编号：KEN2881260K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KEN2881190K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KEN2873540K
●产品描述：
Kennedy® Router Cutters
With Ball Bearing Guide. To trim laminate producing a bevelled edge. With ball bearing guide suitable for straight or shaped work.
Bevel Edge Trimming Bits