产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：KEN2881320K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KEN2950680K
●产品描述：
Kennedy® Wire Wheels & Brushes
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Circular Brushes - Plain Bore
Suitable for removal of rust, paint and dirt from heavily covered parts. Side plates supplied separately.
编号：KEN2959430K
●产品描述：
Kennedy® Wire Wheels & Brushes
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Additional Side Plates for Circular Brushes
Supplied free of charge with circular brushes. Please specify when ordering.
编号：KEN2959360K
●产品描述：
Kennedy® Wire Wheels & Brushes
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Additional Side Plates for Circular Brushes
Supplied free of charge with circular brushes. Please specify when ordering.
编号：KEN2876540K
●产品描述：
Kennedy® Router Cutters
Tungsten carbide tipped cutters to cut slots in rails to accept panels or for cutting slots in frames and doors for 'weather' feature fittings. Arbors are supplied separately.
Three Tooth Slotting/Biscuit Jointing Cutter
编号：KEN2884060K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
For use with all multi-tooth milling cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for "blind" or "through" pilot holes, pin will retract into cutter adaptor on "bottoming".
Pilot Pins
Bore diameter: 20mm.
Overall length: 156mm.
编号：KEN2892120K
●产品描述：
Bosch Style Chisels
Suitable for air and electric hammers and breakers, for all classes of work.
For Bosch: USH27, USH28, 11304, 11308, 12314. 29mm Hex Shank with Single Flat.
编号：KEN2871460K
●产品描述：
Kennedy® Router Cutters
With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
Two Flute Flush Trimming Bits
编号：KEN2872500K
●产品描述：
Kennedy® Router Cutters
For veining work and decor of panels. Larger sizes suitable for chamfering and deep angled groove work.
Two Flute V-Grooving Bits
编号：KEN2872480K
●产品描述：
Kennedy® Router Cutters
For veining work and decor of panels. Larger sizes suitable for chamfering and deep angled groove work.
Two Flute V-Grooving Bits