Heavy Duty Stainless Steel Bolt Clamps

Heavy duty bolt clamps to DIN 3017 are specifically designed to give extremely high band tension for sealing pressure/suction lines with either steel or plastic reinforcement and high shore hardness. Reinforced loops withstand significantly higher torques and the mechanically locked closure has no welding points and therefore no contact corrosion. Bridge gives optimal hose protection and the robust band with rounded edges for protection against injuries and/or damage to the hose surface. The band, housing and screw are all made from high grade 316 Stainless steel.

Zinc-Plated Hose Clips

Non-slip worm drive. Precision manufactured from the finest British steels to BS 5315. Passivated zinc finish to give double protection. For automotive, gas, plumbing and agricultural applications.

Stainless Steel Hose Clips

All 304 stainless steel construction, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991. Lloyd’s Type approved.

Zinc Protected Hose Clips

All mild steel zinc protected hose clip, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991.

Stainless Steel Hose Clips

All 304 stainless steel construction, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991. Lloyd’s Type approved.

Zinc Protected Hose Clips

All mild steel zinc protected hose clip, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991.

Zinc Protected Hose Clips

All mild steel zinc protected hose clip, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991.

Heavy Duty Stainless Steel Bolt Clamps

Heavy duty bolt clamps to DIN 3017 are specifically designed to give extremely high band tension for sealing pressure/suction lines with either steel or plastic reinforcement and high shore hardness. Reinforced loops withstand significantly higher torques and the mechanically locked closure has no welding points and therefore no contact corrosion. Bridge gives optimal hose protection and the robust band with rounded edges for protection against injuries and/or damage to the hose surface. The band, housing and screw are all made from high grade 316 Stainless steel.

O Clips, '2 Ear' Style (Welding Hose Clips)

Manufactured from mild zinc plated/clear passivated stainless steel. Medium pressure clamp, widely used for maintenance and OEM applications. Rubber hose, plastic tubing, coaxial and electrical cable are easily clamped. Suitable for use on air, fluid, gas and steam lines also low pressure hydraulics applications. One piece design offers a positive, tamper proof seal without damage to the hose, assure adequate closure and compensate for tolerance variations in hose sizes.

N.B. Gas Hoses Should Only Be Assembled By Professionally Qualified Fitters.

Stainless Steel Hose Clips

All 304 stainless steel construction, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991. Lloyd’s Type approved.