COBAGRiP Sheet

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Ideal solutions for slip hazards such as spilt liquids or ice.
Available in 3 colours to meet all DDA requirements. Suitable for use with forklift traffic. Simply bond or screw to the existing floor surface.
Product height: 3mm GRP base overall 5mm.

Posts and Fixings

Plastic coated, hollow steel posts and 76mm clips to securely mount your Reflective Traffic Safety Signs.
• Available in three lengths, we recommend the use of a baseplate and to allow approximately 600mm sink below the ground.
• Plastic end caps are available for the tops of posts.
• The screwband fixing and universal channel clamp will allow fixing to existing posts up to 160mm in diameter.
• Each sign requires 2 x 76mm clips, or two each of the screwband and universal fixing clamp for post fixing.

SiteSafe® Safety Signs

Type: Rigid
Size: 400 x 300mm.

Identification Self Adhesive Numbers & Letters

Perfect for factories, warehouses, showrooms, computer rooms and offices etc. Vinyl labelling which is easily applied and can be cleanly removed. 8 sizes in black on yellow with identical digits on each card. Colours are only available in sizes F1, F2 and F3. Cards can be supplied in packs of A - Z and 0 - 9 or as mixed numbers and letters. Cards of directional arrows are available in sizes F3, F4, F5,and F6.

Please refer to the Cromwell Industrial Supplies Catalogue for more details.

SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.

Barrier Tapes Non-Adhesive

High visibility yellow with black text repeated along 300 metre length. 75mm width. Ideal for warning of danger and cordoning off potential hazards.

6 types available with wording:
1) Caution Hard Hat Area
2) Caution Wet Paint
3) Caution Do Not Enter
4) Caution Man Working
5) Danger
6) Caution High voltage

N.B. Picture illustrates tape styles.

Magnetic & Self-Adhesive Label Holders

Label holders provide instant identification for steel racking or shelving warehouses, store rooms or offices. Each label holder is supplied complete with white card so that a specific area can be colour coded. A protective transparent PVC strip is also supplied with each holder.

SiteSafe® Photoluminescent Safety Signs - Self-Adhesive

In the event of a fire or emergency, the visibility of standard emergency signs can often be impaired by poor lighting, smoke or even lack of power. In these cases our photoluminescent signs can provide a cost effective solution.

Our signs use the internationally recognised British Standard symbols for escape routes (BS5499) like their standard counterparts.

High intensity 1.3mm rigid material, tested to DIN 67510 Part 4 specification, which significantly exceeds the minimum Photoluminescent Safety Products Association (P.S.P.A.) Class 1 classification for brightness and longevity. Non-radioactive, non-toxic with no lead or phosphorous. Signs remain highly visible even in complete darkness. Factory applied self-adhesive backing.

Fire Safety Signs

SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.

Floor Identification Markers

Designed to identify, aisle, bay or other warehouse floor areas. Each marker is 190mm diameter. Printed with a bold black numeric digit or letter of your choice on a yellow background. They are suitable for use on dry, clean, flat sealed surfaces and have been independently tested for slip resistance, performing well in all conditions.
Available numbers - 0 to 25.