Autotorch Brazing System

A portable bronze brazing system using only a single cylinder of propane. Automatic piezo-electric ignition plus interchangeable burners.

Burners

No 4103 giving the smallest, No 4105 the largest, flames. The burners must be used at 4 bar pressure and should not be turned down. If a smaller flame is required a smaller burner must be used.

Standard Torch Handles

No. 1185 - With comfortable, flat nylon handle strong enough to withstand rough usage. With standard needle valve. No. 1185/01 - As No. 1185 except hose inlet is replaced with 3/8" BSP-LH male union connection. No. 1245 - Designed with robust nylon handle and trigger operated diaphragm valve - pilot flame is quickly obtained by adjusting the cam ring above the trigger; full flame is given by pulling trigger which can be locked in position for continuous burning. No. 1340 - Specially designed with an immensely strong steel spring handle to stand up to the tough conditions of contractors' use. With standard needle valve. No. 1345 Extended Torch Handle Only (not illustrated) - Extra long handle with arm rest for extra comfort. Standard needle valve. Takes any of the standard burners and can be used in conjunction with the multiple burner adaptors Nos. 1122 and 1123. Overall length: 1060mm.

Regulators

No 4041 Brazing - Specially designed propane regulator to BS.3016 giving a 4 bar preset outlet pressure. Robust brass construction. No 330 Low Pressure - Compact low pressure regulator for propane. Conforms to BS 3016. For industrial and domestic use and for use in caravans, boats and camping. Output pressure: 37m bar.

Low Pressure

No.1021 4.8mm Screwed Hose Connector

Bullfinch No.1021 screwed hose connector 3/8" BSP-LH female union x 4.8mm hose end.

Burners for Standard Torches

Robust, strong, reliable burners for a wide range of needs. No 1470 - Extremely fine flame - for jewellers and dental purposes. No 1472 - Well defined flame. No 1473 - Soft flame for heat shrinking. No 1210 - Small flame for narrow window sashes, central heating installations. No 1220 - Medium flame - for soldering and silver soldering. No 1230 - General purpose flame. No 1240 - More powerful general purpose flame. No 1248 - Standard fishtail burner, excellent flame structure over a wide range of pressures. For paint stripping and applications needing wide fantail flame. No 1250 - Suitable for metal melting. No 1260 - Powerful flame for general engineering purposes. No 1270 - Extremely powerful, for heavy soldering, forging, roofing, weed burning.

Autotorch Brazing System

A portable bronze brazing system using only a single cylinder of propane. Automatic piezo-electric ignition plus interchangeable burners.

Burners

No 4103 giving the smallest, No 4105 the largest, flames. The burners must be used at 4 bar pressure and should not be turned down. If a smaller flame is required a smaller burner must be used.

Burners for Standard Torches

Robust, strong, reliable burners for a wide range of needs. No 1470 - Extremely fine flame - for jewellers and dental purposes. No 1472 - Well defined flame. No 1473 - Soft flame for heat shrinking. No 1210 - Small flame for narrow window sashes, central heating installations. No 1220 - Medium flame - for soldering and silver soldering. No 1230 - General purpose flame. No 1240 - More powerful general purpose flame. No 1248 - Standard fishtail burner, excellent flame structure over a wide range of pressures. For paint stripping and applications needing wide fantail flame. No 1250 - Suitable for metal melting. No 1260 - Powerful flame for general engineering purposes. No 1270 - Extremely powerful, for heavy soldering, forging, roofing, weed burning.

Standard Torch Handles

No. 1185 - With comfortable, flat nylon handle strong enough to withstand rough usage. With standard needle valve. No. 1185/01 - As No. 1185 except hose inlet is replaced with 3/8" BSP-LH male union connection. No. 1245 - Designed with robust nylon handle and trigger operated diaphragm valve - pilot flame is quickly obtained by adjusting the cam ring above the trigger; full flame is given by pulling trigger which can be locked in position for continuous burning. No. 1340 - Specially designed with an immensely strong steel spring handle to stand up to the tough conditions of contractors' use. With standard needle valve. No. 1345 Extended Torch Handle Only (not illustrated) - Extra long handle with arm rest for extra comfort. Standard needle valve. Takes any of the standard burners and can be used in conjunction with the multiple burner adaptors Nos. 1122 and 1123. Overall length: 1060mm.

Burners for Standard Torches

Robust, strong, reliable burners for a wide range of needs. No 1470 - Extremely fine flame - for jewellers and dental purposes. No 1472 - Well defined flame. No 1473 - Soft flame for heat shrinking. No 1210 - Small flame for narrow window sashes, central heating installations. No 1220 - Medium flame - for soldering and silver soldering. No 1230 - General purpose flame. No 1240 - More powerful general purpose flame. No 1248 - Standard fishtail burner, excellent flame structure over a wide range of pressures. For paint stripping and applications needing wide fantail flame. No 1250 - Suitable for metal melting. No 1260 - Powerful flame for general engineering purposes. No 1270 - Extremely powerful, for heavy soldering, forging, roofing, weed burning.

Autotorch Brazing System

A portable bronze brazing system using only a single cylinder of propane. Automatic piezo-electric ignition plus interchangeable burners.

Burners

No 4103 giving the smallest, No 4105 the largest, flames. The burners must be used at 4 bar pressure and should not be turned down. If a smaller flame is required a smaller burner must be used.