产品 / 轴承 & 滚轴 / 轴承座&附件
| 品牌 |
|
编号：SNR6817240E
●产品描述：
SNR Shaft Seals & Adaptors
The SNR SC...SV series consists of a contact washer made of corrosion-protected steel with a vulcanised rubber lip to locate in the housing.
The V-Ring seal has axial contact after being fitted to the shaft with the face of the washer. If the shaft extends through the housing one seal pack must be
ordered for both side of the housing.
Other sealing arrangements are available through your local service branch.
Pillow Block V-Ring Seals
编号：SNR6816971W
●产品描述：
Tab Washers
Tab washers are used for securing KM series lock nuts. They have an inner tab for location on the adaptor sleeve. One of the external tabs is bent over a slot when used wit the
KM series lock nuts.
编号：SNR6816731H
●产品描述：
Adapter Sleeves
Adaptor sleeves are commonly used for locating tapererd bored bearing and securing them to a shaft. They can be accurately positioned and dismounted. By using in conjuction with SNR feeler gauges accurate radial clearances will be achieved.
编号：SNR6738538Z
●产品描述：
Housed Bearing Units
Housed Bearing Units are one of the most effective and easiest solution to accomodate misalignment. Units below consist of housing and insert. A wide range is available including Imperial sizes. Please ask for further information.
Plummer Blocks - Medium Series - NP Type
Cast iron self lube unit plummer blocks. Medium series.
With two slotted holes for fixing.
编号：SNR6738548G
●产品描述：
Housed Bearing Units
Housed Bearing Units are one of the most effective and easiest solution to accomodate misalignment. Units below consist of housing and insert. A wide range is available including Imperial sizes. Please ask for further information.
Take-Up Units - ST Type
Cast iron self lube units are used where shaft adjustments are required on applications such as conveyor systems.
编号：SNR6816953Q
●产品描述：
Lock Nuts
Used primarily to help lock and locate bearings on shafts or adaptor sleeves. They have evenly spaced slots on the circumference for use with the SNR range of hook spanners.
编号：SNR6816950N
●产品描述：
Lock Nuts
Used primarily to help lock and locate bearings on shafts or adaptor sleeves. They have evenly spaced slots on the circumference for use with the SNR range of hook spanners.
编号：SNR6816951H
●产品描述：
Lock Nuts
Used primarily to help lock and locate bearings on shafts or adaptor sleeves. They have evenly spaced slots on the circumference for use with the SNR range of hook spanners.
编号：SNR6816601D
●产品描述：
Adapter Sleeves
Adaptor sleeves are commonly used for locating tapererd bored bearing and securing them to a shaft. They can be accurately positioned and dismounted. By using in conjuction with SNR feeler gauges accurate radial clearances will be achieved.
编号：SNR6816601C
●产品描述：
Adapter Sleeves
Adaptor sleeves are commonly used for locating tapererd bored bearing and securing them to a shaft. They can be accurately positioned and dismounted. By using in conjuction with SNR feeler gauges accurate radial clearances will be achieved.