Spares for Kennedy Combination Squares and Rules

Locking Nut & Mandrel:
For 6" Combination Square (KEN-597-7060K)
For 12" Combination Square (KEN-597-7120K)

Kennedy Hand Saws

The fine cutting Kennedy Meteor Tenon saw has a steel blade with 13TPI and a stiffening cap over the top edge of the blade which prevents flexing and provides good control when cutting. Impact resistant moulded handle.

250mm (10”) Meteor Tenon Saw

Reversible Gent's Saw

Suitable for flush cutting in the most awkward corners on the left or right hand side. Reversible offset alloy steel blade cranked and polished with rigid back. Rosewood handle with brass ferrule. 15 tpi.

Spares for Kennedy Combination Squares and Rules

Scriber:
For 6" Combination Square (KEN-597-7060K)
For 12" Combination Square (KEN-597-7120K)

Flat Bits

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

Flat File - Straight Handle

With tough enamelled alloy bodies and high carbon heat treated steel blades.



For straight filing with flat blade as standard. Plastic handle.
Blade length: 255mm.
Blade width: 40mm.
Overall length: 395mm.

Kennedy® Beechwood Folding Rules Class III

Manufactured from Beechwood for strength and flexibility and painted bright yellow. Metric and inch graduations, large, clear and deep for increased tool life and easy reading.
Sizes available: 1m x 5 folds
2m x 10 folds
Graduations: Metric - mm & cm (cm figures in red)
Inch - 1/16", 1/8", 1/4", 1/2", 1"
Accuracy: Class III

Try Squares

Used for marking out right angles and testing squareness. Rosewood stock with brass face for greater wear resistance. Blades are manufactured from hardened steel, and secured by three steel washers with brass rivets. Solid Rosewood stock with solid brass facing securely fixed to the stock provides a hard wearing contact edge.

Kennedy® Steel Back Gent's Saws

Suitable for precise flush cutting. Sprung alloy steel blade with rigid steel back, polished rosewood handle and brass ferrule. Blade width: 60mm (2,1/4").

Bevel Edge Wood Chisels

Designed to give a life time of high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished. 'C.A.B.' (cellulose acetate butyrate handles).

Craftsman

Hammer-blow resistant handles. For craftsmen and joiners.