产品 / 动力工具 & 磨料磨具 / 合金旋转锉
品牌

第一页前一页<<2122最后一页

12.7x28mm CONICAL 14DEG C/B BURR CUT 9

12.7x28mm CONICAL 14DEG C/B BURR CUT 9

编号：YRK2108329K
●产品描述：
York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
16x14mm CONICAL 60DEG. CARBIDE BURR CUT 9

16x14mm CONICAL 60DEG. CARBIDE BURR CUT 9

编号：KEN2108660K
●产品描述：
Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 60 Inc. Angle

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
12x20mm CYL. CARBIDE ENDCUT BURR CUT 9

12x20mm CYL. CARBIDE ENDCUT BURR CUT 9

编号：KEN2100280K
●产品描述：
Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
12x25mm CYL. CARBIDE ENDCUT BURR CUT 3

12x25mm CYL. CARBIDE ENDCUT BURR CUT 3

编号：KEN2100340K
●产品描述：
Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical-End Cutting

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
9.5x4.7mm CONICAL 90DEG C/B BURR CUT 9

9.5x4.7mm CONICAL 90DEG C/B BURR CUT 9

编号：YRK2108939K
●产品描述：
York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 90 Inc. Angle

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
6x18mm CYL. CARBIDE END CUT BURR CUT 3

6x18mm CYL. CARBIDE END CUT BURR CUT 3

编号：KEN2100140K
●产品描述：
Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical-End Cutting

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
12x20mm POINTED TREE CARBIDE BURR CUT 9

12x20mm POINTED TREE CARBIDE BURR CUT 9

编号：KEN2104280K
●产品描述：
Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Pointed Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
16x33mm CONICAL 14DEG. CARBIDE BURR CUT 9

16x33mm CONICAL 14DEG. CARBIDE BURR CUT 9

编号：KEN2108400K
●产品描述：
Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

第一页前一页<<2122最后一页