Tuffsafe Fall Arrest Harnesses

Tuffsafe fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

Tuffsafe body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue.

The range includes: 1, 2, 3 & 4 point fall arrest harnesses.

TSH2 Front & Rear Body Fall Arrest Harness - 2 Point Attachment

Two point front & rear body harness manufactured from strong 45mm wide water repellent polyester webbing.
Lightweight and durable therefore ideal for all day comfort and dependability.
Fully adjustable shoulder and thigh straps and fitted with high tensile stainless steel fittings and back anchorage dorsal D-ring attachment and chest mounted D-ring attachment.
Also fitted with rip stitch fall indicators.
Weight: 1.22kg

Certified to:
CE 0320
EN 361
EN 364

Australian Standard: AS/NZS 1891.1:2007

Tuffsafe Fall Arrest Equipment

Trauma suspension straps are simple and easy to use and can fit all Tuffsafe harnesses. They allow the worker to stand up in their harness to ease the discomfort whilst suspended from a lanyard after a fall. Helps release the tension within the harness straps to relieve pressure on the groin which helps prevent loss of circulation to the legs and feet.
Prior to use attach one pack to the outer side of each leg strap. In the event of a fall unzip the pouches to release the straps and thread the plain end through both chrome rings and back through only one and pull tight to form a loop approx shin height. Stand up slowly on the straps and the discomfort will be relieved.
Lightweight and unobstructive.
Weight: 150g

TSTSS Trauma Suspension Straps

Tuffsafe Fall Arrest Equipment

Parking loops are simple and easy to use. Prevents wear on harness straps. The clip is designed to fit onto the shoulder strap of the harness. One fitted the karabiner is connected directly to the loop for safe stowage when not in use. This stops the lanyard from trailing on the floor and causing a trip hazard.
Weight: 10g

TSPL Parking Loops

Tuffsafe Fall Arrest Equipment

"Soft Edge" 32mm wide, cut resistant polyester webbing provides greater strength and resistance along with it"s water repellent coating can help prolong it"s life. Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link.
Max arrest force 6KN
Weight: 0.60kg

Certified to:
CE 0320
EN 364
EN 355

Australian Standard: AS/NZS 1891.1:2007

TSSA1 1.3m Shock Absorbing Lanyard - with Karabiner Hook

Tuffsafe Fall Arrest Harnesses

Tuffsafe fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

Tuffsafe body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue.

The range includes: 1, 2, 3 & 4 point fall arrest harnesses.

TSH1 Rear Body Fall Arrest Harness - 1 Point Attachment

One point rear body harness manufactured from strong 45mm wide water repellent polyester webbing.
Lightweight and durable therefore ideal for all day comfort and dependability.
Fully adjustable and fitted with high tensile steel fittings and back anchorage dorsal D-ring attachment.
Also fitted with rip stitch fall indicators.
Weight: 1kg

Certified to: CE 0320
EN 361

Tuffsafe Fall Arrest Equipment

Twin legs allow movement between anchorage points. The elasticated lanyard reduces the amount of hanging slack to help reduce trip hazards and entanglement. Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link. The 35mm tubular webbing and tear webbing provides greater strength and resistance.
Max fall arrest force 6KN.
Weight: 1.50kg

Certified to: CE 0320
EN 364
EN 355

TSSA9 1.3m Twin Leg Elasticated Shock Absorbing Lanyard - with 2 Scaffold Hooks

Tuffsafe Fall Arrest Equipment

The lanyard block is a retractable mini web block ideal for personal issue to operatives working at height. The unit is designed to be connected and worn directly on a fall arrest harness. Locks on with decelerating brake action in the event of a fall and recoils the lanyard when slack is introduced to reduce trip hazards in tight work spaces. Compact design, built in shock pack. Has a working length of 2.5 metres.
Max fall arrest force 6KN.
Size: (L)100 x (W)110 x (D)75mm
Weight: 1.12kg

Certified to: CE 0320
EN 364
EN 360

TSEAL1 2.5m Retractable Energy Absorbing Lanyard Block - with Karabiner Hook

Tuffsafe Fall Arrest Harnesses

Tuffsafe fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

Tuffsafe body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue.

The range includes: 1, 2, 3 & 4 point fall arrest harnesses.

TSH4 Front & Rear Body Fall Arrest Harness With Belt - 4 Point Attachment

Four point front & rear body harness with belt manufactured from strong 45mm wide water repellent polyester webbing.
Lightweight and durable therefore ideal for all day comfort and dependability.
Fully adjustable and fitted with high tensile stainless steel fittings, back anchorage dorsal D-ring attachment, chest mounted D-ring attachment and two side D-ring attachments. The work-positioning belt is comfortable and provides lumbar support, it is fitted with three loops for carrying tools leaving your hands free.
Also fitted with rip stitch fall indicators.
Weight: 1.90kg

Certified to:
CE 0320
EN 361
EN 364
EN 358

Australian Standard: AS/NZS 1891.1:2007

Tuffsafe Fall Arrest Harnesses

Tuffsafe fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

Tuffsafe body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue.

The range includes: 1, 2, 3 & 4 point fall arrest harnesses.

TSH3 Rear Body Fall Arrest Harness With Belt - 3 Point Attachment

Three point rear body harness with belt manufactured from strong 45mm wide water repellent polyester webbing.
Lightweight and durable therefore ideal for all day comfort and dependability.
Fully adjustable and fitted with high tensile stainless steel fittings, back anchorage dorsal D-ring attachment and two side D-ring attachments. The work-positioning belt is comfortable and provides lumbar support, it is fitted with three loops for carrying tools leaving your hands free.
Also fitted with rip stitch fall indicators.
Weight: 1.76kg

Certified to: CE 0320
EN 361
EN 364
EN 358

Tuffsafe Fall Arrest Equipment

"Soft Edge" 32mm wide, cut resistant polyester webbing provides greater strength and resistance along with it"s water repellent coating which helps prolong it"s life. Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link.
Max fall arrest force 6KN
Weight: 0.90kg

Certified to:
CE 0320
EN 364
EN 355

Australian Standard: AS/NZS 1891.1:2007

TSSA11 1.3m Shock Absorbing Lanyard - with scaffold hook