Circular Drum Tray

Where there is only one drum in use in an area, the Oil Storage Regulations state that a drum tray with a capacity that is 25% of the size of the drum is sufficient. This 100% polyethylene circular tray meets the requirement. It is also ideal as a temporary bund for smaller items during maintenance operations, including batteries.
L x W x H (cm): 87 diameter x 19
Sump (ltrs): 50
(drum and lid not included).

SOT-8

4-drum Workfloor

All three sizes of workfloor have the same 15cm height for easier loading and unloading. The grates are easily removed for cleaning.
L x W x H (cm): 166 x 126 x 15
Sump (ltrs): 300

SW-4

Salvage Container

Where a drum is damaged or leaking UN transport regulations require that it is transported in a leak proof container. This container fully meets these regulations. The 100% polyethylene construction ensures compatibility to a broad band of chemicals and oils. The lid is fully threaded and can be tightened using a bar or piece of timber across the slots. The moulded design externally allows for lifting by a fork-lift or sling.
L x W x H (cm): 81 dia x 105
Sump (ltrs): 360

SSD-360

Polyethylene Storage Cabinets

One or more of these cabinets provide a neat and tidy solution to the storage of drums and containers of various sizes up to 205 litres. All sizes are fully weather resistant and complete with lockable doors and integral sumps.

SSC-CAB5

L x W x H (cm): 72 x 92 x 152
Sump (ltrs): 100

Drum Racker & Stacker

For safe storage and dispensing applications put one or more of these units in place. The base unit can be used on its own for two drums, or up to two levels of stackers can be used for a maximum storage of six drums. Corrosion resistant 100% polyethylene construction.

SDS-B2

L x W x H (cm): 139 x 125 x 49
Sump (ltrs): 400

Drum Trolley

This easy to use unit combines safe transport, storage and dispensing from drums all in one. Any spills that occur during dispensing are safely stored in the sump. Simple to use one person operation.
L x W x H (cm): 160 x 74 x 64
Sump (ltrs): 230

SDT-230

Double IBC Spill Pallet

This is the largest polyethylene spill pallet available, and can be used for a variety of applications including the regulation compliant storage of two 1000 litre IBCs or up to eight 205 litre drums. The strong polyethylene rotationally moulded design ensures that there is no distortion of the side walls when under load.
L x W x H (cm): 256 x 135 x 51
Sump (ltrs): 1140

SSP114

Workfloor Ramp

This ramp is designed to be safe to use with any size of workfloor, with an integral joining strip to ensures that it stays in position and a ribbed surface for better grip. At only 80cm wide it can be fitted to any edge of each of the work floors. 100% polyethylene.
L x W x H (cm): 65 x 80 x 16

SWR-1

4-drum spill pallet

Compact 4-drum pallet with a low loading height of only 28cm. The sump capacity of 230 litres is large enough to comply with the regulations. 100% polyethylene construction.
L x W x H (cm): 128 x 128 x 28
Sump (ltrs): 230

SDP-4

2-drum Spill Pallet

100% polyethylene construction is resistant to corrosion and the knocks and scrapes of the industrial environment. Fully compliant with all current regulations.
L x W x H (cm): 122 x 82 x 33
Sump (ltrs): 240

SDP-2