产品 / 工装夹具 / 机床附件
编号：KEN4824110K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Extension Sockets
编号：KEN4903620K
●产品描述：
Kennedy® Serrated Soft Jaws
BSW serrations. To suit inch serrated Coventry/Tudor manual chucks.
3 Jaw Sets
Large
编号：KEN4881330K
●产品描述：
Kennedy® Standard Duty Interchangeable Revolving Centre Sets
Manufactured from high alloy steel, precision ground internally and externally with pre-lubricated bearings. A versatile revolving centre with interchangeable points for a wide variety of applications. Ideal for toolroom or manufacture of small turned components. Points fit into body by means of a taper and are removed by use of the drift key supplied. All mating surfaces are precision ground and the set is supplied in a varnished wooden storage box. Maximum Runout: 0.005mm.
编号：KEN4826450K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Turret Sockets
编号：KEN4905550K
●产品描述：
Kennedy® Serrated Soft Jaws
To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc).
3 Jaw Sets
编号：KEN4906630K
●产品描述：
Kennedy® T-Nuts
To suit Howa & Kitagawa power chucks.
Double Bolt Type
编号：KEN4901050K
●产品描述：
Kennedy® Soft Scroll Jaws to Suit Pratt Burnard Chucks
For Standard, Super Precision, Griptru, All Steel (type 78), Pratt Burnard old type and Hardinge chucks.
3 Jaw Sets
编号：KEN4825430K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Turret Sockets
编号：KEN4881040K
●产品描述：
Kennedy® Standard Duty Revolving Centres
Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Maximum Runout: No 1 to 4 taper: 0.005mm, No 5 to 6 taper: 0.010mm.
编号：KEN4901090K
●产品描述：
Kennedy® Soft Scroll Jaws to Suit Pratt Burnard Chucks
For Standard, Super Precision, Griptru, All Steel (type 78), Pratt Burnard old type and Hardinge chucks.
3 Jaw Sets