Safety Padlocks Dedicated Lockout Padlocks

Brady padlocks are supplied "keyed differently" this means that the key for one lock should not open another Brady padlock as the padlocks are constructed using 5 or 6 pin cylinders to offer high levels of safety and security. Both cylinders and keys are precision machined to exacting standards. This enables a greater number of uniquely keyed padlocks to be produced than other locks with the same number of pins, making it highly unlikely that you will ever receive a duplicate lock. To guarantee that each lock is different, Brady can chart your locks, to ensure each Brady padlock you receive is keyed differently from the others. Custom keyed options are available on request.



Non-conductive, non-sparking reinforced nylon with a hardened steel shackle, to produce a padlock that is impact resistant and chemical and corrosion resistant. The key will not release until the shackle is closed. Patented insulated key chamber to protect workers from shocks when the key is inserted.
Each padlock is supplied with one key.
Dimensions:
Body width: 25 x 38mm
Shackle diameter x clearance: 6.5 x 38mm

Stubby Lockout Hasp

To be used when lockout conditions vary in size. Designed to Lockout anything from small switch boxes up to large control units and levers with a single device. Accepts up to 6 padlocks,
Max. padlock shackle diameter: 10mm
Min. padlock shackle clearance: 20mm

Prinzing Ball Valve Lockout

The two halves of the device encompass the ball valve lever to secure it from inadvertent activation of the valve.

Locks out pipes from 12.50 to 31mm in open and closed position.



Product number: 800110
Colour: Red
Material: Ultra-tough Polypropylene
Capacity: Outside Pipe Diameter 12.5 to 31mm
Accepts padlocks: Shackle Clearance 38mm, Shackle Diameter 6.5mm

Colour Coded Steel Padlocks

Coloured bumpers supplied for identification and protection.
Locks are supplied keyed differently (Custom Keyed Alike & Master Keyed options also available). Each padlock supplied with one key.

Scissor Lok Lockout

The Brady scissor lok, locks out multiple gate valves simultaneously. Secures power cords, free standing equipment, tanks, cylinders or safety guards.



Product Number: 236921
Cable length: 0.91m
Colour: Yellow
Material Type: heavy-duty chemical resistant nylon.
Accepts padlocks: Shackle Clearance 19.05mm Shackle Diameter 7mm

Tagout - Warning Tags

Tagout is the placement of a tag, which indicates that the energy-isolating device and the equipment being controlled MUST NOT be operated until the tag has been removed. Used to indicate who is responsible for placing a Lockout device and who is authorised to remove it or make changes to it.
The tags are manufactured from flexible polyester, resistant to water, oil and extreme temperatures. Their matt surface allows you to write on them easily with a ball point or felt-tip pen. Other text versions available on request.
Pack of 10 tags with cable ties. Size: 75 x 160mm.

Standard Gate Valve Lockout

Locks out gate valves from 25 to 320mm. Made of durable polypropylene for superior impact and chemical resistance. Withstands temperatures from -30C to 150C. Comes with danger labels in English, Spanish and French. Colour: red. (Yellow, green and blue available on request).
Max. shackle diameter: 6.5mm.
Min. shackle clearance: 38mm.

Colour Coded Steel Padlocks

Coloured bumpers supplied for identification and protection.
Locks are supplied keyed differently (Custom Keyed Alike & Master Keyed options also available). Each padlock supplied with one key.

Butterfly Valve Lockout

Made of strong polypropylene plastic. Fully dielectric (non-conductive), highly resistant to solvent and other chemical products. Highly resistant to cracking and abrasion and resistant to extreme temperature changes from -46 to 183C.
Two padlocks can be applied for extra security.
Max. shackle diameter: 8mm.
Min. shackle clearance: 25mm.
Colour: red. (Yellow, green and blue available on request).

Safety Padlocks Dedicated Lockout Padlocks

Brady padlocks are supplied "keyed differently" this means that the key for one lock should not open another Brady padlock as the padlocks are constructed using 5 or 6 pin cylinders to offer high levels of safety and security. Both cylinders and keys are precision machined to exacting standards. This enables a greater number of uniquely keyed padlocks to be produced than other locks with the same number of pins, making it highly unlikely that you will ever receive a duplicate lock. To guarantee that each lock is different, Brady can chart your locks, to ensure each Brady padlock you receive is keyed differently from the others. Custom keyed options are available on request.



Non-conductive, non-sparking reinforced nylon with a hardened steel shackle, to produce a padlock that is impact resistant and chemical and corrosion resistant. The key will not release until the shackle is closed. Patented insulated key chamber to protect workers from shocks when the key is inserted.
Each padlock is supplied with one key.
Dimensions:
Body width: 25 x 38mm
Shackle diameter x clearance: 6.5 x 38mm