Chargers for Cordless Tools

Additional chargers used in conjunction with extra batteries offer the advantage of continuous tool use while original batteries are charging, therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines and circuit board manufacturing.

Kobe Powertool Battery Chargers

Charger to suit Kobe (ASB 12 VET-2) 12V batteries.

Hitachi NiCd Batteries

Least expensive cell technology. Has the least temperature sensitivity of the three battery types. A large number of charge cycles is possible.

EB1220BL 12.0V Battery 2.0AH NiCd

Charger compatibility: UC35SFL, UC18YRL/J0 and UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

Bosch 9" Anti-Vibration Angle Grinders

GWS 22-230LVI
Unbeatable light! 20% less weight with 100% power. KickBack stop for maximum user protection in case of a disc jam. Soft start is convenient and limits the starting current. Burst proof quick adjustable guard for superior convenience and protection. New vibration control side handle with soft pads - the perfect grip. New 2200W low weight Champion motor. Softgrip for better handling. Restart protection for superior user protection if switch is on after power interuption. Vibration control main handle double damping.

Specifications:
Rated power: 2200W.
No load speed: 6500rpm.
Disc diameter: 230mm.
Weight: 5.3kg.
Disk supplied separately.

Available in 240V and 110V.

Hitachi 8" Sliding Compound Mitre Saw

C8FSE
Twin horizontal rails give a maximum cutting width of 312mm. Left bevel cutting up to 48. Lightweight design. Soft grip handle.

Specifications:
Blade diameter: 216mm.
Bore size: 30mm.
Max. cut depth cross cut: 65 x 312mm.
Mitre cut (45°L/R): 65 x 220mm.
Bevel cut (45°L): 45 x 312mm.
Max compound cut: 45 x 220mm.
Power input 1050W.
No load speed: 5500/min.
Weight: 14.0kg.
Supplied with: 24 tooth TCT saw blade, dust bag, vice assembly and wrench.

Available in 240V and 110V.

Dremel Digital Multi-Tool Set

4000 Series
Dremel F0134000JE 4000 Series multi-tool with 65 accessories. High power 175W motor for high performance. Soft grip in all gripping areas for better handling. Full variable speed control (5000-35,000 RPM) for maximum precision. Electronic feedback for enhanced torque and performance. Separate on/off switch with integrated collet lock out function.

Rated power input: 175W.
Voltage: 230V.
Weight: 0.66kg.
No load speed: 5000 - 35,000 1/min.

Contents:
Dremel 4000 multi-tool, pencil grip nose cap, high quality flex shaft, line & circle cutter, shaping platform, detailer’s grip, 65 high quality Dremel accessories in mini accessory case (including SpeedClic starter set), inspiring welcome poster, instruction manual, sturdy and spacious storage space.

DeWalt Compact Drill Driver/Impact Driver Twin Pack

DCK211S2
Two 10.8V compact bodies which enable operation in confined spaces and repetitive use with minimal fatigue.

Kit contains:

DCD710:
10.8V drill driver with 10mm chuck and 0-450/1500rpm, features 15+1 position adjustable torque control.

DCF815:
10.8V impact driver delivering 107Nm torque, 0-2450rpm with 3400bpm, features 3 LED "Halo" ring, providing maximum illumination to workpiece and a 6.35mm "drop in" hex retention, allowing 25mm bits to be inserted directly.

Complete with:
2x 10.8V 1.3Ah Li-Ion batteries.
1x 10.8V 40min charger.
1x heavy-duty kit bag.

Impact Wrench

impact wrench that features a 1/2" square drive, perfect for hard nut applications on Hex heads, bolt tightening, fitting anchors in stone or brick and clamping pipes or wood together. Ball socket retention to allow for easy exchange and removal of nuts.

No Load speed: 2800rpm
Impact rate: 3200rpm
Bolt range: M4-M16

Naked tool only - Batteries and Charger are supplied separately.

Heat Gun Accessories

For welding tarpaulin, ground sheets etc.
Made from stainless steel. Used in
conjunction with the 14mm Reduction
Nozzle KBE-298-3808S.

Slit Nozzle 40mm

Makita Batteries for Cordless Tools

Charger compatibility: DC18RA, DC18SE, DC24SC, DC24WA.

NiMh Batteries - ?Slide-On? Type

Hitachi NiCd Batteries

Least expensive cell technology. Has the least temperature sensitivity of the three battery types. A large number of charge cycles is possible.

EB1820 Battery 18V 2.0AH NiCd

Charger compatibility: UC18YRL/J0 and UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.