SDS Hammer Drill

Powerful hammer drill with tool-free SDS chuck and 2 drilling modes for wood and metal drilling or masonry hammer drilling.

No Load Speed: 1500rpm
Impact rate: : 5000bpm
Drilling capacities: Concrete 16mm, Steel 13mm, Wood 24mm
Battery capacity: 3.0Ah
Weight: 2.1kg

SDS+ Hammer Drill

Heat Gun Accessories

For soldering and for use with heat
shrinkable tubing. Made from stainless
steel.

Soldering Reflector Nozzle

Hitachi Power Tool Battery Chargers

Suitable for slide-on 25.2 - 36.0V Li-Ion batteries. 60 minute charge (25.2V x 3.0Ah battery). 80 minute charge (36.0V x 2.6Ah battery).
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

UC36YRL 25.2V-36V Charger

Cordless Variable Speed Drills

Powerful, multi-talented tool for drilling and screwdriving. Keyless chuck with Auto-Lock for the fastest and easiest tool changes, Forward/reverse operation. Torque preselection with 25 torque settings plus 1 drill setting - optimum power for every application. 1x 1.5Ah NiCd batteries with 1-hour quick charger with "battery full" detection, LED PowerLight,
Run-out brake and switch-on lock, Softgrip for a more comfortable hold. Supplied in a carrying case.

PSR14.4-2 - 14.4v Ni-Cad

No load speed: 0 - 400/1250rpm.
Max. torque: soft/hard: 22/36Nm.
Screw diameter: up to 8mm.
Drilling diameter: steel 10mm, wood 35mm.
Weight: 1.75kg.

Palm Sander

Easy-to-handle, dust-free palm sander. Double insulated for safety. Includes abrasive papers (pack of 6), dust bag, punch plate and hook & loop clamp.

Specifications:
Pad size: 112 x 102mm.
Abrasive sheet: 114 x 140mm.
Orbital action: 1.5mm.
Orbits per minute: 14,000.
Weight: 1.1kg.

Available in 240V and 110V.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Makita 180mm 2400W Angle Grinder

GA7040S
Rotatable rear handle can be positioned to suit most cutting operations. Labyrinth construction seals the motor from dust and debris by creating a complex set of channels prohibiting contamination. Protective zig-zag anti-dust varnish seals the motor from debris by forming an impenetrable barrier under rotation for longer life. Low vibration rear handle with soft grip for more comfort and control.

Specifications:
Continuous rating input: 2,400W, 110V.
No load speed: 8,500rpm.
Depressed centre wheel: 180mm.
Cut-off disc: 180mm.
Wire cup brush: 110mm.
Overall length: 473mm.
Weight: 4.7kg.
Disc supplied separately.

DeWalt Cordless Batteries

Much higher capacity than even NiMH. Charge loss during storage is less than half that of NiCad. No memory at all, no periodic conditioning is needed.

DE9180-XJ 18V Nano Tech Battery Pack

Charger compatibility: DE9000-XJ

Makita Batteries for Cordless Tools

Charger compatibility: DC18RA, DC18SE, DC24SC, DC24WA.

NiMh Batteries - ?Slide-On? Type

Osaki™ Metal Cut Off Saw

Designed for workshop use, this robust and powerful high speed saw slices quickly and cleanly through ferrous metal bar, tube and profile up to 200mm. Can also be used for cutting brick, stone and masonry products when fitted with an appropriate masonry disc. Includes full safety guard, quick release material clamp and carry handle. Supplied with Al-Oxide cutting wheel for metal and open ended wrench. 1 year guarantee. For DIY & hobby use.

Specifications:
Power input: 2000W.
Voltage: 240V/50Hz.
Disk size: 355 x 25.4 x 3.2mm.
Maximum cutting capacity: 115mm.
Footprint: 445mm x 245mm.
Swivelling range: 0-45°.
Vice clamping range: 0-240mm.
Saw width at 90°: 100/70 x 170mm.
Saw width at 45°: 100/70mm.
Sound pressure level LPA: 98dBA.
Sound power level LWA: 111dBA.
Dimensions: (L)600 x (D)330 x (H)430mm.
Weight: 19.6kg.

FOR DIY USE
Not warranted for Industrial Use