180mm (7") 2300W Angle Grinder

Powerful 2,300W motor with dust proof ball bearing portion and durable retainer. New contruction to protect against grease leakage. Paddle switch (lock-on/lock-off) style. Sliding trigger (dead man's switch) style. With spindle lock 3-position side handle and tool-less angle adjustment of the disc guard.

Specifications:
Power input: 2,300W.
No load speed: 8,500rpm.
Wheel diameter: 180mm.
Hole diameter: 22mm.
Spindle thread: M14 x 2.
Weight: 5.2kg.

Supplied with pin spanner, side handle and grinding disc.

G18SE3-VIB

Hitachi 125mm (5") Angle Grinder

Powerful 1,200W motor with deadman switch for increased safety. Wear resistance of armature coil and excellent overload durability. Grinding wheel replacement is made easier with a spindle lock. Supplied with grinding disc, side handle and wrench. No load speed: 11,000rpm. Power input: 1200W. Wheel diameter: 125mm. Hole diameter: 22.2mm. Spindle thread: M14 x 2. Weight: 1.9kg. Supplied with grinding disc, side handle and wrench.

G13SE2

Hitachi Variable Rotary Drill

Lightweight and compact size with a high speed 240W motor. Supplied with chuck key, depth stop, belt clip.
No load speed: 4500/min.
Power input: 240W.
Capacities: steel 6.5mm, wood 9mm.
Chuck capacity: 6.5mm.
Overall length: 206mm.
Weight: 0.9kg.

Available in 240V and 110V.

D6SH

Hitachi Nibblers

CN16SA
Lightweight design with slimline grip. Fast cutting speed of 1.8m/min (mild steel plate). Downward cutting action permits cutting of trapezoidal metal plate and minimises scattering of chips on workpiece. Three position indexing die holder allows quick and easy change of cutting direction.

Specifications:
Cutting capacity: mild steel 1.6mm, S/steel: 1.2mm, aluminium plate: 2.3mm.
Power input: 400W.
No load speed 2300/min.
Min cutting radius: 40mm.
Length: 250mm.
Weight: 1.7kg.
Standard Accessories: die, punch and 2 wrenches.

Available in 240V and 110V.

180mm (7") 2300W Angle Grinder

Powerful 2,300W motor with dust proof ball bearing portion and durable retainer. New contruction to protect against grease leakage. Paddle switch (lock-on/lock-off) style. Sliding trigger (dead man's switch) style. With spindle lock 3-position side handle and tool-less angle adjustment of the disc guard.

Specifications:
Power input: 2,300W.
No load speed: 8,500rpm.
Wheel diameter: 180mm.
Hole diameter: 22mm.
Spindle thread: M14 x 2.
Weight: 5.2kg.

Supplied with pin spanner, side handle and grinding disc.

G18SE3-VIB

110mm Variable Speed Jigsaw

Variable speed jigsaw with soft grip handle. Four stage orbital action enables rapid and accurate cutting. Tool-free blade locking system. LED spotlight to illuminate cut line. Dust blower to ensure cut line is visible. Variable speed motor with electronic feedback speed control. Tough nickel plated die-cast aluminium base. Supplied with blade, splinter guard, chip guard, dust collector, hex key and tool case. Power input: 720W. No load speed: 850 - 3,000rpm. Capacities: mild steel 10mm, wood 110mm. Stroke length: 246mm. Min. corner radius: 25mm (1"). Length: 246mm. Weight: 2.2kg

CJ110MV

Hitachi NiMh Batteries

Much higher potential capacity than NiCad. Require less conditioning than NiCad. Less toxic than NiCad.

EB1833X Battery 18V 3.3Ah Super Ni-MH

Charger compatibility: UC18YRL/J0 and UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

Hitachi Li-Ion Batteries

Much higher capacity than even NiMH. Charge loss during storage is less than half that of NiCad. No memory at all, no periodic conditioning is needed.

BCL1815 Battery 18V 1.5Ah Li-Ion

Charger compatibility: UC18YRL/J0 and UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

Low Vibration SDS-Max Rotary Hammer Drill

Low vibration SDS-Max rotary hammer drill with variable speed and two mode action (rotary hammer drilling and hammer only) with neutral position. Variable lock mechanism for chiselling.

No-load speed: 240-480rpm
Impact rate: 2312-2650bpm
Impact energy: 10.5 Joules
Drilling capacities: concrete 40mm (Drill), 105mm (TCT core)
Weight: 6.8kg

Available in 240V and 110V.

Hitachi 8" Sliding Compound Mitre Saw

C8FSE
Twin horizontal rails give a maximum cutting width of 312mm. Left bevel cutting up to 48. Lightweight design. Soft grip handle.

Specifications:
Blade diameter: 216mm.
Bore size: 30mm.
Max. cut depth cross cut: 65 x 312mm.
Mitre cut (45°L/R): 65 x 220mm.
Bevel cut (45°L): 45 x 312mm.
Max compound cut: 45 x 220mm.
Power input 1050W.
No load speed: 5500/min.
Weight: 14.0kg.
Supplied with: 24 tooth TCT saw blade, dust bag, vice assembly and wrench.

Available in 240V and 110V.