115mm (4,1/2") 840W Angle Grinder

Increased power at 840W makes this grinder ideal for masonry work. Labyrinth construction protects all ball bearings from dust and debris. Small circumference barrel grip for easy handling. Shaft lock for easy wheel changes. Wheel size: 115mm. Bore Size: 22mm. Spindle size: M14x2mm. No Load Speed: 11,000rpm. Input wattage: 840W. Weight: 1.6kg. Accessories: Lock nut, lock nut wrench, inner flange, side handle and wheel guard.

9557NB

Palm Sander

Easy-to-handle, dust-free palm sander. Double insulated for safety. Includes abrasive papers (pack of 6), dust bag, punch plate & clamp only.

Specifications:
Pad size: 112 x 102mm
Abrasive sheet: 114 x 140mm
Orbital action: 1.5mm
Orbits per minute: 14000
Weight: 1.1Kg

Available in 240V and 110V.

230mm (9") 2000W Angle Grinder

Increased heat resistance, soft grip for more comfort and control. Superior anti-dust structure with machined bevel gear for strength. Gear housing swivels at 90 degrees. Wheel size: 230mm. Bore Size: 22mm. No Load Speed: 6,600rpm. Input: 2,000W. Spindle size: M14 x 2mm. Wire Cup Brush: 110mm. Net Weight: 4.70kg. Accessories: Lock nut wrench, side handle, wheel guard.

GA9020

Makita Metal Nibbler

Zips through sheet metal, plastics and other sheet materials. Built-in thickness gauge for convenience with easy punch and die replacement for reduced down time.
Input wattage: 660w
Strokes per minute: 1,300spm
Max. Cut in Mild Steel: 3.2mm
Max. Cut in Stainless Steel: 2.5mm
Min. Cutting Outside Edge: 128mm
Radius Inside Edge: 120mm
Weight: 3.50kg
Supplied with:
3mm hex wrench, punch & die set, spacers x 2.

JN3200

18V Cordless Impact Wrench

Same fastening torque in forward and reverse rotations with full torque at 6 seconds after seating. Compact design provides more control and maneuverability. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact. The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are joined with vibration absorbing cushion rubbers. The large bumper protects workpiece from scratches,increasing maneuverability. Ergonomically designed handle with rubberized soft grip provides more control and comfort. Easy-to-operate LED light for illuminated operation can be turned on or off with an independent switch, and features an over-discharge-protective circuit. Also features a hanging hook.

Capacity: Standard bolt:M12 - M22; High tensile bolt: M12 - M16
Impacts per minute: 2,200
No load speed: 1,600rpm
Maximum torque 440Nm
Dimensions (L x W x H) 266mm x 82mm x 290mm
Net weight: 3.4kg

Naked tool only - Batteries and Charger not supplied.

Makita 125mm (5") Angle Grinder

Increased power at 710W. Labyrinth construction protects all ball bearings from dust and debris. Small circumference barrel grip for easy handling. Shaft lock for easy wheel changes. Easier repairing of gear section, assembled with key. High heat resistance. No Load Speed: 10,000rpm. Wheel size: 125mm. Bore Size: 22mm. Spindle size: M14x2mm. Input wattage: 710W. Net Weight: 1.4kg. Accessories: Lock nut, wrench, flange and wheel guard, side handle.

9555NB

Cordless Drill Driver

2 speed drill driver that generates up to 42Nm torque. Equipped with an all metal gear box for long life reliability. Comes complete with 2x Lithium-Ion batteries.

No load speed: 0 - 400/0 - 1,300rpm.
Max. drilling capacities: steel 13mm, wood 36mm.
Batteries: 2x 3.0Ah Li-Ion.
Weight: 1.8kg

Makita Battery Chargers for Cordless Tools

Li-Ion/Makstar Chargers. These chargers use a built-in memory chip in the battery and a chip in the charger to decide on the best charging method. Optimal charging is achieved by controlling current, voltage and thermal. Additional chargers used in conjunction with extra batteries also increase productivity, charging batteries while not in use. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing.

DC24SC Battery Charger

Li-Ion/NiMH quick charger. 7.2 to 24V. 30 minute charge (3.0Ah battery).

SDS Plus Rotary Hammer Drill

Blows per minute: 4050bpm
No load speed: 1050rpm
Drilling capacities: concrete 22mm steel 13mm wood 32mm
Joules: 2.3Js
Weight: 2.5kg

Available in 240V and 110V, in models with chuck or keyless chucks.

18V LXT Drill Driver Body ONLY

BDF453Z