Donghua Roller Chain

The Donghua Chain Group is one of the world's largest chain manufacturers with an established global network; producing over 30 million metres of finished chain each year. Donghua's primary focus is quality and its advanced manufacturing techniques, combined with complete control of the production process from the selection of raw material through to the assembly of each component ensure Donghua Chain provides high performance solutions across all applications.

Duplex Roller Chain American Standard

Duplex Chain

Table Top Slat Chain

A complete range of table top chains and sprockets in steel, stainless steel and molded thermoplastics. These are manufactured specifically for a conveying applications.
Some table top chains have been standardised between manufacturers. We show below the most popular ranges but with many specialty attachments and options available on table top chain, please contact your local service centre to assist in identifying and recommending the right table top chain for your application.

981M Series - Side Flexing Chain, Magnetic

Reduced Flight Gap
Material: Superior grade
of cold rolled special
ferritic stainless steel
Length: 10?.

RexPlus Stainless Steel Chain

RexPlus is the proven corrosion and acid resistant roller chain that satisfies the highest demands on quality dependability and service life.
Through the use of new materials and consistent further development, RexPlus shows its superiority over all other conventional stainless steel chains.

Simplex Chain

Link-Belt Roller Chain

Other sizes from 5/16" up to 2" pitch are also available from stock. Please ask for details

Simplex Roller Chain American Standard

Simplex Chain

Simplex Chain

1/2" Pitch simplex carbon steel chain suitable to a wide range of applications supplied in 10 feet lengths.

Pitch: 12.70mm
Ult. Strength: 18.60kN

126SRX10FT European Series

Roller Chain

Renold Blue Box chain with their unique control over pin/bush contact, ensures that little initial chain adjustment is therefore required. Renold Blue Box roller chain is highly fatigue resistant with breaking loads exceed the minimum requirements of the international standards.
The specification of Renold chain has evolved from decades of design, test and application experience which delivers product reliability and consistency. Other sizes from 5/16” to 2” pitch are also available please ask for details.
Conforms to: DIN8187/IS606

Simplex Chain

RexPro Carbon Steel Chain

With RexPro, Rexnord set a new standard for quality chains. The RexPro chain is the result of further developing the
Rexnord high performance chain. Over a timespan of four years the combination of selected steels, optimised manufacturing and the RexPro lubrication have all achieved these outstanding product characteristics.

American Standard Connecting Links - Duplex Connecting Link

Link-Belt Connecting Links

Other sizes from 5/16" up to 2" pitch are also available from stock. Please ask for details

Simplex Roller Chain British Standard

Duplex Chain

Simplex Chain

1/2" Pitch simplex carbon steel chain suitable to a wide range of applications supplied in 10 feet lengths.

Pitch: 12.70mm
Ult. Strength: 18.60kN

126SRX10FT European Series

RexCarbon - Maintenance Free

No Need for Re-lubrication RexCarbon. For medium load capacity and difficult conditions. High-tech thermoplastic sliding sleeves offer many technical advantages. Carbon bushings for high fatigue strength. In contrast to a normal standard chain, RexCarbon achieves an 18 times higher resistance to wear.