产品 / 工装夹具 / 垫片
编号：PCN4153010A
●产品描述：
Precision Brand Stainless Steel Shims
Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.
Tensile strength: 185,000psi min.
Stainless Steel Shims - Metric Sizes
编号：PCN4153200L
●产品描述：
Precision Brand Stainless Steel Shims
Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.
Tensile strength: 185,000psi min.
8 Piece Assorted Pack - Metric Sizes
Contains one of each of the following thickness of shim:
0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40 and 0.50mm.
Size (W x L): 150mm x 1.25m
编号：PCN4152150Q
●产品描述：
Precision Brand Steel Shims
All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.
Steel Shims - Inch Sizes
编号：PCN4155060F
●产品描述：
Stainless Steel Shim
Precut 300 Series
The best way to solve alignment and levelling problems on motors, pumps, generators and other plant machinery! The pre-cut shims are safer and easier to position as the tab eliminates the need to place hands under machinery during installation or removal of the shim. Engineered for quality, all shim thickness tolerances meet industry standards and conform to standard bolt and stud sizes. Each shim is clearly marked with its thickness.
编号：PCN4153090J
●产品描述：
Precision Brand Stainless Steel Shims
Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.
Tensile strength: 185,000psi min.
Stainless Steel Shims - Metric Sizes
编号：PCN4156700L
●产品描述：
Stainless Steel Shim
Assorted Packs
Contain ten of each of the above thickness of shim.
编号：PCN4153770G
●产品描述：
Colour-Coded Plastic Shim Stock
Manufactured from a high quality plastic material. Used for gaskets, special parts and various manufacturing applications it is easy to cut, resists oil and has minimal compression during use. The thickness tolerances are to industry standards. Non-conductive to electricity. The thickness is indicated by shim colour which eliminates the need for a micrometer.
编号：PCN4152380H
●产品描述：
Precision Brand Steel Shims
All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.
Steel Shims - Metric Sizes
编号：PCN4152120M
●产品描述：
Precision Brand Steel Shims
All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.
Steel Shims - Inch Sizes
编号：PCN4156060F
●产品描述：
Stainless Steel Shim
Precut 300 Series
The best way to solve alignment and levelling problems on motors, pumps, generators and other plant machinery! The pre-cut shims are safer and easier to position as the tab eliminates the need to place hands under machinery during installation or removal of the shim. Engineered for quality, all shim thickness tolerances meet industry standards and conform to standard bolt and stud sizes. Each shim is clearly marked with its thickness.