Scantool Guillotine Shear

Strong and compact welded steel construction. This model is foot-operated and very suitable for cutting metal and all other materials. The material being sheared is held in place by neoprene coated clamps to prevent damage. The material is clamped before the blade cuts. The knife is reversible and made of high-speed steel.
It provides good visibility of the complete cutting length and is supplied with a light.
Cutting Capacity (Width x Thickness): 1030 x 1 25mm
Cutting Angle: 3
Backguage: 600mm
Side Stop: 200mm
Blade Style: Plain
Weight: 148kg

TSM 1050

Scantool Guillotine Shear

Manual back gauge with mm counter. Illumination of cutting edge. Safety equipment in accordance with CE. 600mm table extensions. Self-lubricating guides. Double eccentric drive on the cutter bar. Rubber-coated sheet holder. Low knife angle and burr-free cutting. Angle stop. Special equipment. Cutting counter. Motorised back gauge. Sheet catcher. Special blades for cutting stainless steel sheets. Table extension and angle stop with millimetre gauge and tilt stop. Adjustable angle stop with millimetre gauge and tilt stop.
Cutting Capacity (Width x Thickness): 1030 x 2.00mm
Cutting Angle: 3
Backguage: 550mm
Side Stop: 200mm
Blade Style: Plain
Weight: 280kg

TSP 1050

James Walker® TICO® Machine Mounting Pads

Versatile machine mounting material damping pads which are compatible with all types of machine base, i.e. individual feet, cast skirts or flat base. Manufactured from graded cork particles and a synthetic rubber, TICO® has a high coefficient of friction and resists most oils, spirits and cutting fluids. Easy to cut and install.

Typical applications:
General-purpose plant and machinery; machinery with high centre of gravity or internal out-of-balance forces e.g. lathe, pillar drill, shaper, saw; machinery with vertical shock load e.g. power press, slotting machine, guillotine, crusher etc.
Available in 4 sizes all with a thickness of 12.5mm.

Scantool Bending Rolls

All models cover the capacity range of 1.0mm to 3.0mm thickness with a rolling length of 1040mm, these heavily constructed all cast iron framed machines with high quality steel rolls have been designed for ease of operation, all rolls have wire grooves.



Bending Capacity (Width x Thickness): 1040 x 3.0mm
Roller Diameter: 90mm
Operation Type: Hand
Rolling Speed: (Manual)
Weight: 620kg

Bottom Blade

BOTTOM BLADE FOR ATL448-3000K SHEAR

Bottom Blade

BOTTOM BLADE FOR ATL448-1200K SHEAR

Bench Shears

Hand operated, compound lever action bench shears. Capable of rapidly cutting through metal plate, strip and bar. Solid steel frame for rigidity and strength. With hardened and precision ground blades for accurate cutting. Adjustable blade guard.



Capacities:
Maximum plate thickness: 8.0mm
Maximum strip section: 10x100mm.
Maximum Bar diameter: 16mm.
Maximum angle section: 6x40mm.
Maximum T section: 6x40mm.
Dimensions (WxHxD): 500x360x150mm.
Weight: 43Kg

Bench Shears

Hand operated, compound lever action bench shears. Capable of rapidly cutting through metal plate, strip and bar. Solid steel frame for rigidity and strength. With hardened and precision ground blades for accurate cutting. Adjustable blade guard.



Dimensions (WxHxD): 370x370x150mm.
Weight: 19Kg.

Bench Shears

Hand operated, compound lever action bench shears. Capable of rapidly cutting through metal plate, strip and bar. Solid steel frame for rigidity and strength. With hardened and precision ground blades for accurate cutting. Adjustable blade guard.



Dimensions (WxHxD): 260x200x120mm.
Weight: 7.5Kg.

Top Blade

TOP BLADE FOR ATL448-3000K SHEAR