敲击扳手-能帛文工具

品牌

30mm WORKSHOP OPEN END SPANNER

编号：KEN5801300K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

11mmx13mm WORKSHOP OPEN END SPANNER

编号：KEN5803280K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

2.5/8" A/F RING SLOGGINGWRENCH

编号：KEN5807750K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

8mm WORKSHOP OPEN END SPANNER

编号：KEN5801080K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

41mm O/E CRANKED PODGER SPANNER

编号：SNA5800538J

●产品描述：

Cranked Open Jaw Podger Spanners

Cranked handle assists with location of spanner on to fixings within a recess. Open jaw spanners are designed to engage the nut from the side and as it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.

32mm OPEN JAW SLOGGING WRENCH

编号：KEN5806040K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

46mm RING SLOGGING WRENCH

编号：KEN5807070K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

110mm RING SLOGGING WRENCH

编号：KEN5807200K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

8mmx9mm WORKSHOP OPEN END SPANNER

编号：KEN5803100K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

4.1/4" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806900K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.