敲击扳手-能帛文工具

品牌

2.1/4" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806690K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

2.1/8" A/F RING SLOGGINGWRENCH

编号：KEN5807670K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

1.3/8" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806550K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

52/55mm C-SPANNER

编号：KEN5805520K

●产品描述：

Kennedy C-Hook Spanners

Manufactured from chrome vanadium steel with a black oxidised finish. Specifically designed for use with slotted retaining rings. Conforms to DIN 1810A.

7mm WORKSHOP OPEN END SPANNER

编号：KEN5801070K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

11mm WORKSHOP OPEN END SPANNER

编号：KEN5801110K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

19mm RING CRANKED PODGERSPANNER

编号：KEN5808720K

●产品描述：

Podger Ring End Spanners

Cranked handle assists with location of spanner on to fixings within a recess.

70mm OPEN JAW SLOGGING WRENCH

编号：KEN5806120K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

2.5/8" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806750K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

3.7/8" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806870K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.