敲击扳手-能帛文工具

品牌

46mm O/E PODGER SPANNER

编号：KEN5808590K

●产品描述：

Podger Open Ended Spanners

Open jaw spanners are designed to engage the nut from the side and as it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.

3.1/8" A/F RING SLOGGINGWRENCH

编号：KEN5807810K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

3.5/8" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806850K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

65mmx70mm WORKSHOP OPEN END SPANNER

编号：KEN5804600K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

1.13/16" A/F RING SLOGGING WRENCH

编号：KEN5807620K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

9mm WORKSHOP OPEN END SPANNER

编号：KEN5801090K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

2.15/16" A/F RING SLOGGING WRENCH

编号：KEN5807790K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

32mm O/E PODGER SPANNER

编号：KEN5808560K

●产品描述：

Podger Open Ended Spanners

Open jaw spanners are designed to engage the nut from the side and as it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.

1.5/16" A/F RING SLOGGING WRENCH

编号：KEN5807540K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

2.7/16" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806720K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.