敲击扳手-能帛文工具

品牌

2.15/16" A/F RING SLOGGING WRENCH

编号：KEN5807790K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

3.5/8" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806850K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

6mmx7mm WORKSHOP OPEN END SPANNER

编号：KEN5803060K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

140mm RING SLOGGING WRENCH

编号：KEN5807260K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

2.15/16" A/F OPEN JAW SLOGGING WRENCH

编号：KEN5806790K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

2.3/8" A/F RING SLOGGINGWRENCH

编号：KEN5807710K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

40/42mm C-SPANNER

编号：KEN5805400K

●产品描述：

Kennedy C-Hook Spanners

Manufactured from chrome vanadium steel with a black oxidised finish. Specifically designed for use with slotted retaining rings. Conforms to DIN 1810A.

36mm O/E PODGER SPANNER

编号：KEN5808570K

●产品描述：

Podger Open Ended Spanners

Open jaw spanners are designed to engage the nut from the side and as it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.

105mm OPEN JAW SLOGGING WRENCH

编号：KEN5806190K

●产品描述：

Open Jaw Slogging Wrenches

Manufactured to DIN 133.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

80mm RING SLOGGING WRENCH

编号：KEN5807140K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.