敲击扳手-能帛文工具

品牌

1.5/8" A/F RING SLOGGINGWRENCH

编号：KEN5807590K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

2.7/16" A/F RING SLOGGING WRENCH

编号：KEN5807720K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

95mm RING SLOGGING WRENCH

编号：KEN5807170K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

2" A/F RING SLOGGING WRENCH

编号：KEN5807650K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

22mmx24mm WORKSHOP OPEN END SPANNER

编号：KEN5803820K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

105mm RING SLOGGING WRENCH

编号：KEN5807190K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

90mm RING SLOGGING WRENCH

编号：KEN5807160K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

1.15/16" A/F RING SLOGGING WRENCH

编号：KEN5807640K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

1.1/2" A/F RING SLOGGINGWRENCH

编号：KEN5807570K

●产品描述：

Ring Slogging Wrenches

Manufactured to DIN 7444.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

90mm WORKSHOP OPEN END SPANNER

编号：KEN5801900K

●产品描述：

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended